52-Port Gigabit SmartPro Switch including 4 SFP Ports

DGS-1500-52

Share
Overview
D-Link’s DGS-1500 Series SmartPro switches are designed for SMBs which need functions such as Static Routing and Single IP Management (Virtual Stacking). This series integrates advanced management and security functions that are similar to those of a managed switch, but less complex. The switches feature D-Link Green™ 3.0 technology which enables significant power savings.

Management options include SNMP, Web Management, SmartConsole Utility, and Compact CLI. The series also supports ACL filtering and D-Link’s Safeguard Engine. The DGS-1500-20 and DGS-1500-28 both feature a fanless design. The fanless design emits less noise than a standard switch, increases the products’ lifetimes, and makes them better suited for office environments.

Power over Ethernet
The DGS-1500-28P’s 10/100/1000 Mbps ports are PoE-enabled for powering devices such as IP cameras, VoIP phones and wireless access points. Compliant with 802.af and 802.3at, the DGS-1500-28P is capable of providing up to 30 Watts on all ports when paired with a DPS-700. The DPS-700 enables the DGS-1500-28P to have 1+1 power redundancy and boosts the total PoE budget to 740 W. By itself, the DGS-1500-28P has a PoE power budget of 370 W, allowing it to provide up to 15.4 W to all ports simultaneously. Time-based PoE enables power to a port to be shut off at a scheduled time, reducing power usage and increasing security by powering off devices that should not be in use during non-business hours.

D-Link Green™ 3.0 Technology
D-Link takes the lead in developing innovative and power-saving technology that does not sacrifice operational performance or functionality. The DGS-1500 Series implements D-Link Green™ 3.0 Technology, which includes a power saving mode, smart fans, reduced heat dissipation, and cable length detection. The power-saving features include the ability to schedule when to turn off LEDs and ports when not in use, and when to make the switch enter hibernation mode. The switches also detect the length of connected cables to automatically adjust power usage by saving energy on shorter cable connections of less than 20 meters. The switches can also support power saving by link status, which drastically reduces power consumption by automatically putting ports without a link into sleep mode. The DGS-1500-28P and DGS-1500-52 both feature built-in smart fans that contribute to continuous, reliable, and eco-friendly operation of the switch. Using a thermal sensor that can detect temperature change, the fans can react accordingly by utilizing different fan speeds for different temperatures.

Advanced Features
The DGS-1500 Series includes advanced features such as Virtual Stacking and Static Routing. Virtual Stacking reduces the number of IP addresses needed on a network by configuring up to 32 devices to appear as a single unit with one IP address. This simplifies network management for small workgroups and allows for switches to be added without special cabling. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster and more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only.

Extensive Layer 2 Features
These switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality.

VLAN and Bandwidth Control
The DGS-1500 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for video surveillance and VoIP deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data and surveillance video transmission through a single SmartPro switch, thus sparing businesses the expense of maintaining dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN with higher priority. This guarantees the quality and security of the VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require higher priority.

Secure your Network
D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port based authentication, allowing the network client to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the network by screening traffic from illegal MAC or IP addresses. The DGS-1500 Series includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.

Versatile Management
The DGS-1500 series provides a SmartConsole utility and a web-based management interface that enable administrators to remotely control their network down to the port level. The SmartConsole easily allows customers to discover multiple D-Link Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the Smart Switches. Switches within the same L2 network segment that are connected to the user’s PC are displayed on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. The DGS-1500 Series also supports D-View 6.0 and a Compact Command Line Interface (CLI). D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. CLI management of the switches is possible via Telnet. This makes it possible to adjust basic settings, passwords, configuration files, and firmware with ease.

Limited Lifetime Warranty
D-Link offers a Limited Lifetime Warranty on the DGS-1500 Series ProSmart switches to further its commitment to product quality and long-term customer confidence.
Technical Specifications

General

Port Standard & Functions
• IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twistedpair copper)
• Auto-negotiation
• IEEE 802.3x Flow Control support for Full-Duplex Mode
• IEEE 802.3af1
• IEEE 802.3at1

Number of Ports
• DGS-1500-20:
     • 16 10/100/1000BASE-T plus 4 Gigabit SFP
• DGS-1500-28:
     • 24 10/100/1000BASE-T plus 4 Gigabit SFP
• DGS-1500-28P:
     • 24 10/100/1000BASE-T PoE plus 4 Gigabit SFP
• DGS-1500-52:
     • 48 10/100/1000BASE-T plus 4 Gigabit SFP

Network Cables
• UTP Cat.5, Cat.5e (100m max)
• EIA/TIA-568 100-ohm STP (100m max)

Full/Half Duplex
• Full/half duplex for 10/100Mbps speeds
• Full duplex for Gigabit speed

Media Interface Exchange
• Auto MDI/MDI-X adjustment for all twisted-pair ports

Performance

Switching Capacity
• 40 Gbps (DGS-1500-20)
• 56 Gbps (DGS-1500-28)
• 56 Gbps (DGS-1500-28P)
• 104 Gbps (DGS-1500-52)

Transmission Method
• Store-and-forward

MAC Address Table
• 16K entries per device

MAC Address Update
• Up to 256 static MAC entries
• Enable/disable auto-learning of MAC addresses

Maximum 64 bytes packet forwarding rate
• 29.8 Mpps (DGS-1500-20)
• 41.7 Mpps (DGS-1500-28)
• 41.7 Mpps (DGS-1500-28P)
• 77.4 Mpps (DGS-1500-52)

Packet Buffer Memory
• 1 MB per device

PoE (DGS-1500-28P only)

PoE Standard1
• IEEE 802.3af compliance
• IEEE 802.3at compliance
• Legacy mode support

PoE Capable Ports1
• 15.4W or 30W on ports 1 to 24

PoE Power Budget1
• Max: 370W
• 740W with external DPS-700

Physical & Environmental

AC Input
• 100 to 240 VAC, 50/60 Hz internal universal power supply

Maximum Power Consumption
• 14.06W (DGS-1500-20)
• 16.81W (DGS-1500-28)
• 447W PoE on; 30.1W PoE off (DGS-1500-28P)
• 43.5W (DGS-1500-52)

Standby Power Consumption
• 6.7W/100V; 7.2W/240V (DGS-1500-20)
• 5.9W/100W; 6.42W/240V (DGS-1500-28)
• 19.7W/100V; 19.8W/240V (DGS-1500-28P)
• 20.68W/100V; 22.05W/240V (DGS-1500-52)

Fan Quantity
• 0 (DGS-1500-20)
• 0 (DGS-1500-28)
• 2 smart fans (DGS-1500-28P)
• 2 smart fans (DGS-1500-52)

Acoustics
• 0 dBA (DGS-1500-20)
• 0 dBA (DGS-1500-28)
• High speed: 55.3 dBA / Low speed: 49.5 dBA (DGS-1500-28P)
• 47.1 dBA Max. (DGS-1500-52)

Heat Dissipation
• 47.97 BTU/hr (DGS-1500-20)
• 57.36 BTU/hr (DGS-1500-28)
• 1525.16 BTU/hr (DGS-1500-28P)
• 148.42 BTU/hr (DGS-1500-52)

Operating Temperature
• -5 to 50 ˚C (41 to 122 ˚F)

Storage Temperature
• -20 to 70 ˚C (-4 to 158 ˚F)

Operating Humidity
• -5 to 50 ˚C (41 to 122 ˚F)

Dimensions (L x W x H)
• DGS-1500-20:
     • 17.32 x 5.51 x 1.73 inches (19” standard rack mounting width, 1U height)
• DGS-1500-28:
     • 17.32 x 8.27 x 1.73 inches (19” standard rack mounting width, 1U height)
• DGS-1500-28P:
     • 17.32 x 12.20 x 1.73 inches (19” standard rack mounting width, 1U height)
• DGS-1500-52:
     • 17.32 x 9.84 x 1.73 inches (19” standard rack mounting width, 1U height)

Weight
• 4.85 lbs (DGS-1500-20)
• 6.39 lbs (DGS-1500-28)
• 11.16 lbs (DGS-1500-28P)
• 9.04 (DGS-1500-52)

Diagnostic LEDs
• Power (Per device)
• Link/Activity/Speed (Per 10/100/1000 Mbps port)
• Link/Activity/Speed (Per SFP port)
• Fan (per device)1,2
• PoE (per 10/100/1000 Mbps port)1
• PoE Max1
• RPS1
• LED Select Indicator button1

Certifications
• FCC Class A, CE Class A, ICES-003, VCCI Class A, C-Tick, BSMI

Safety
• UL/cUL, LVD

MTBF
• 253,460 hours (DGS-1500-20)
• 236,739 hours (DGS-1500-28)
• 206,075 hours (DGS-1500-28P)
• 201,517 hours (DGS-1500-52)

Software Specifications

D-Link Single IP Management
• Virtual Stacking/Clustering of up to 32 devices
• Supports IPv4/IPv6

L2 Features
• MAC Address Table
     • 16K entries
• Flow Control
     • 802.3x Flow Control
     • HOL Blocking Prevention
• IGMP Snooping
     • IGMP v1/v2 Snooping
     • Supports 256 IGMP groups
     • Supports at least 64 static multicast addresses
     • IGMP per VLAN
     • Supports IGMP Snooping Querier
• Spanning Tree Protocol
     • 802.1D STP
     • 802.1w RSTP
     • 802.1s MSTP
• Loopback Detection
• Port Mirroring
     • One-to-One
     • Many-to-One
     • Supports Mirroring for Tx/Rx/Both
• 802.3ad Link Aggregation
     • DGS-1500-20: Max. 10 groups per device, 8 ports per group
     • DGS-1500-28/DGS-1500-28P: Max. 14 groups per device, 8 ports per group
     • DGS-1500-52: Max. 26 groups per device, 8 ports per group
• Cable Diagnostics
• Configurable MDI/MDIX
• Multicast Filtering
     • Forwards all unregistered groups
     • Filters all unregistered groups
• Jumbo Frame
     • Up to 10,000 bytes
• LLDP
• LLDP-MED

VLAN
• 802.1Q
• VLAN Group
     • Max. 4K static VLAN groups
     • Max. 4094 VIDs
• GVRP
     • Up to 256 dynamic VLANs
• Asymmetric VLAN
• Auto Voice VLAN
     • Max. 10 user defined OUI
     • Max. 8 default OUI
• Auto Surveillance VLAN

QoS (Quality of Service)
• 802.1p Quality of Service
• 4 queues per port
• Queue Handling
     • Strict
     • Weighted Round Robin (WRR)
• CoS based on
     • 802.1p Priority Queues
     • DSCP
     • ToS
     • IPv6 Traffic Class
     • IPv6 flow label
     • TCP/UDP port
• Bandwidth Control
     • Port-based (Ingress/Egress, min. granularity 10/100/1000 is 64 Kb/s

L3 Features
• ARP
     • 128 Static ARP
     • Supports Gratuitous ARP
• IPv6 Neighbor Discovery (ND)
• IP Interface
• Supports 4 interfaces

L3 Routing
• Default Routing
• Static Routing
     • Max. 32 IPv4 Static Route entries
     • Max. 128 IPv4 Host Routes
     • Max. 16 IPv6 Static Route entries
     • Max. 64 IPv6 Host Routes

Access Control List (ACL)
• DGS-1500-20/28/28P:
     • Max. 50 profiles
     • Max. 200 rules shared by profiles
     • Each rule can be associated with a single port or multiple ports
• DGS-1500-52:
     • Max. 50 profiles
     • Max. 450 rules shared by profiles
     • Each rule can only be associated with a single port
• ACL Based on
     • MAC Address
     • IPv6 Address (ICMP/IGMP/TCP/UDP)
     • 802.1p
     • DSCP
     • Ethernet type

Security
• Port Security
     • Supports up to 64 MAC addresses per port
     • Broadcast/Multicast/Unicast Storm Control
• D-Link Safeguard Engine
• 802.1X Port-based Access Control
• DHCP Server Screening
• IP-MAC-Port Binding
     • Supports 512 address binding entries
     • ARP mode
     • ACL mode
     • Supports DHCP Snooping
• ARP Spoofing Prevention
     • Max. 64 entries
• Traffic Segmentation
• SSL
     • Supports v1/v2/v3
     • Supports IPv6
• SSHv2
     • Supports IPv4/IPv6

AAA
• 802.1X Authentication
     • Supports local/ RADIUS database
     • Supports Port-based access control
     • Supports EAP, OTP, TLS, TTLS, PEAP
• IPv6 RADIUS Server

MIB
• 1213 MIB II
• 1493 Bridge MIB
• 1907 SNMP v2 MIB
• 1215 Trap Convention MIB
• 2233 Interface Group MIB
• D-Link Private MIB
• LLDP MIB
• Power-Ethernet MIB1

RFC Standard Compliance
• RFC Standard Compliance
• RFC 783 TFTP
• RFC 854 Telnet Server
• RFC 951 BootP/DHCP Client
• RFC 1157 SNMP v1, v2, v3
• RFC 1213 MIB II
• RFC 1215 MIB Traps Convention
• RFC 1350 TFTP
• RFC 1493 Bridge MIB
• RFC 1769 SNTP
• RFC 1542 BootP/DHCP Client
• RFC 1901 SNMP v1, v2, v3
• RFC 1907 SNMP v2 MIB
• RFC 1908 SNMP v1, v2, v3
• RFC 2068 FCS
• RFC 2131 BootP/DHCP Client
• RFC 2138 RADIUS Authentication
• RFC 2139 RADIUS Authentication
• RFC 2233 Interface Group MIB
• RFC-2246 SSL
• RFC 2475
• RFC 2570 SNMP v1, v2, v3
• RFC 2575 SNMP v1, v2, v3
• RFC 2598 CoS

OAM
• Cable Diagnostics
• Factory Reset

Management
• Web-based GUI
• Single IP Management
• Compact CLI
• Telnet Server
• TFTP Client
• Configurable MDI/MDIX
• SNMP
     • Supports v1/v2/v3
• SNMP Trap
• Trap for SmartConsole Utility
• System Log
     • Max. 500 log entries
• BootP/DHCP Client
• ICMP v6
• IPv4/v6 Dual Stack
• DHCP Auto Configuration
• Debug Command
• Time Setting
     • SNTP
• RMONv1
• Trusted Host
• Time-based PoE1
• User Account
• Upload/Download Configuration file
• Backup/Upgrade firmware
• Smart Wizard
• SNTP

Green™ V3.0 Technology
• Power Saving by:
     • Link Status
     • Cable Length
• LED Shutoff
• Port Standby
• System Hibernation
• Time-based PoE1
• Port shutoff

Warranty Information

Warranty
• Limited Lifetime3

Ordering Information
• DGS-1500-20 SmartPro 20-port Gigabit Switch including 4 SFP ports
• DGS-1500-28 SmartPro 28-port Gigabit Switch including 4 SFP ports
• DGS-1500-28P SmartPro 28-port Gigabit PoE Switch including 4 SFP ports
• DGS-1500-52 SmartPro 52-port Gigabit Switch including 4 SFP ports

Optional Products

Optional SFP Transceivers
• DGS-712 1000BASE-T Copper
• DEM-310GT 1000BASE-LX, Single-mode, 10 km
• DEM-311GT 1000BASE-SX, Multi-mode, 550 m

Optional Management Software
• DV-600S D-View 6.0 Network Management System (Standard Edition)
• DV-600P D-View 6.0 Network Management System (Professional Edition)

Optional Redundant Power Supply for DGS-1500-28P
• DPS-700 589W Redundant Power Supply / 370W PoE Power Budget

1Available on DGS-1500-28P only.
2Available on DGS-1500-52 only.
3Limited Lifetime Warranty available only in the USA.
Datasheets
Description Type File Size
Download
DGS-1500 Series Datasheet
Show moreShow less
PDF 1.45mb

Business Benefits

"PoE made it really easy to mount the cameras exactly where we need them. It’s much more practical. The image quality is excellent and digital storage works out great for us."
Lano Mann
IT Consultant Grand Canyon Skywalk, PC-Mann

How to get the
DGS-1500-52

Contact Details

D-Link US
17595 Mt Herrmann St
Fountain Valley
CA 92708
USA

General Inquiries:
1.800.326.1688

Sales:
sales@dlink.com

Technical Support:
Business Customers: 1.877.354.6555

Home Customers: 1.877.453.5465