60 Watt Redundant Power Supply for D-Link Managed Switches

Description

• Redundant Power Supply for xStack DES, DGS Series

The DPS-510 is the backup Redundant Power Supply for the DES-3010PA. When the DES-3010PA is equipped with the DPS-510, both power supplies are switched on and share the current load. In case the power supply of the DES-3010PA should fail, the DPS-510 will instantaneously take 100% of the load without any loss. The DPS-510 provides up to 130 Watts of redundant power to help insure that even PoE powered devices such as phones, APs, and cameras remain alive and active in the event the internal power supply fails. In addition, the DPS-510 also supports a fan-failure signal to indicate when a fan is about to fail based on detected reduced fan RPM. The DPS-510 is rack mountable and can be mounted in an EIA standard-size 19-inch rack. If rack mounting is not required, the DPS-510 can also be easily placed on a desktop or wiring closet shelf. The DPS-510 includes everything you need to get started right out of the box including: AC Power cord, RPS cable for connecting to the DES-3010PA, Rack mounting brackets for rack installations and rubber feet for desktop or shelf mounting.

Product/Performance Specifications

DPS-200

• 60Watt Redundant Power Supply Unit (Includes RPSU Cable and AC Power Cord)

DPS-500         

• 140Watt Redundant Power Supply Unit (Includes RPSU Cable and AC Power Cord)

DPS-800         

• (2) Slot, 1U, 19 inch Rackmounting Chassis For DPS-200, DPS-300, and/or DPS-500 Units

Hold Up Time    

• 16ms at Max Load and 115VAC Input at 60Hz Output Drop Down to 95% Voltage

Efficiency      

• 75% Min. At Max Load and 115VAC Input

Input Specifications

AC Input Voltage Rating      

• 100VAC to 240VAC

AC Input Voltage Range    

• 90VAC to 264VAC

AC Input Frequency    

• 47Hz to 63Hz

Max. In-Rush Current       

• 30A Max @ 115VAC, 60A Max @ 230VAC at 25° Ambient Cold Start

Max Input Current (DPS-200)    

• 1.6A Max For 115VAC & 0.8A Max For 230VAC

Max Input Current (DPS-500)      

• 4.0A Max For 115VAC & 2.0A Max For 230VAC

Output Specifications

Output Voltage       

• +12V

Min. Load Current

• 0.5A

Max Load Current

• 5.0A

Line Regulation       

• (+/-) 2% Measured Output Load From (+/-) 10% Rated Load

Physical & Environmental

Safety    

• UL and/or CSA

Dimensions RPSU (WxDxH)       

• (6.69 x 7.48 x 1.77 inches) RPSU Units

Dimensions Chassis (WxDxH)    

• (19.06 x 7.09 x 2.17 inches) DPS-800 Chassis

Weight RPSU        

• (2.2 lbs) Weight Is Without DPS-800 Chassis

Weight Chassis        

• (2.0 lbs) Weight Is Without RPSU Units

Temperature    

• Operating: 0° - 40° C (32° - 104° F)

Storage      

• -25° - 55° C (-13° - 131° F)

Humidity       

• Operating: 20% to 80% RH, Non-Condensing

Warranty and Support Information

Warranty      

• Power Supplies and Fans Carry A Limited 1 Year Warranty.

Support        

• Free Technical Support

Ordering Information

DPS-200         

• 60Watt Redundant Power Supply Unit (Includes RPSU Cable and AC Power Cord)

DPS-500         

• 140Watt Redundant Power Supply Unit (Includes RPSU Cable and AC Power Cord)

DPS-800         

• (2) Slot, 1U, 19 inch Rackmounting Chassis For DPS-200, DPS-300 and/or DPS-500 Units