Support

iSCSI SAN

D-Link provides a range of Storage Area Network (SAN) arrays solutions that help businesses to store, share and protect their business critical data. They are easy to install and manage, high performance, scalable network storage solutions for small and medium businesses and entry level small and medium enterprise customers.

With VMWareTM, CitrixTM and Microsoft Hyper-vTM certification, these storage arrays can be easily implemented in virtualized server environments, deployed as near line storage or as a supplement to primary backup and recovery devices.

Compare 0 products ( ) Begin comparing

xStack Storage® 4x1GbE iSCSI SAN Array, 5-Bay Desktop

DSN-1100-10
D-Link's DSN-1100-10 iSCSI SAN array is an entry-level network storage solution in a 5-bay desktop form factor, ideal for small businesses. The heart of the DSN-1100-10 is a powerful 10Gbit iSCSI System-on-a-Chip (SoC) capable of handling over 80,000 I/OS per second. The DSN-1100-10 supports 10TB of raw capacity using 2TB drives and can be easily implemented as a supplemental backup platform for quick restores, as secondary online storage, or as bandwidth-demanding primary storage for security surveillance and A/V applications.

Find out more

  • 5-Bay Desktop
  • Up to 10TB
  • GbE Connectivity
  • 4xGbE

SureSync Continuous Data Protection and Replication Software for xStack Storage®

DSN-210-SW

Description

Find out more

  • Replication Software
  • DSN-1100-10
  • DSN-2100-10
  • DSN-3200-10

xStack Storage® 8x1GbE iSCSI SAN Array, 15-Bay Rackmount

DSN-3200-10

 

Find out more

  • 3U Rackmount
  • Up to 30TB
  • GbE Connectivity
  • 8xGbE

xStack Storage® 1x10GbE iSCSI SAN Array, 15-Bay Rackmount

DSN-3400-10

 

Find out more

  • 3U Rackmount
  • Up to 30TB
  • 10GbE Connectivity
  • 1x10GbE

xStack Storage® Expansion JBOD for DSN-4100/4200

DSN-4000

 

Main Features
• SAS/SATA Drive Support

Physical Features
• 16 Hot-Swap SAS/SATA Hard Drive Bays
• 3U 19-inch Rack

Find out more

  • Expansion JBOD
  • DSN_4100
  • DSN-4200
  • 3U Rackmount

xStack Storage® 8x1GbE iSCSI SAN Array, 16-Bay Rackmount

DSN-4200

 

Main Features
• Supports Up to 32TB with 2TB Drives
• Eight 1GbE Data Ports
• RAID 0,1,1+0,5 and JBOD
• SAS/SATA Drive Support
• 1GB Cache
• Single Controller
• Online Capacity Expansion and RAID Level Migration
• VMware, MS Hyper-V, Citrix

Physical Features
• 16 Hot-Swap SAS/SATA Hard Drive Bays
• Expandable to 80 Bays Supporting Up to 160TB Total Capacity
• 3U 19-inch Rack

Find out more

  • 3U Rackmount
  • Up to 160TB
  • GbE Connectivity
  • 8xGbE

xStack Storage® 4x1GbE iSCSI SAN Array, 16-Bay Rackmount

DSN-4100

 

Main Features
• Supports Up to 32TB with 2TB Drives
• Four 1GbE Data Ports
• RAID 0,1,1+0,5 and JBOD
• SAS/SATA Drive Support
• 512 MB Cache
• Single Controller
• Online Capacity Expansion and RAID Level Migration
• VMware, MS Hyper-V, Citrix

Physical Features
• 16 Hot-Swap SAS/SATA Hard Drive Bays
• Expandable to 80 Bays Supporting Up to 160TB Total Capacity
• 3U 19-inch Rack

Find out more

  • 3U Rackmount
  • Up to 240TB
  • GbE Connectivity
  • 4xGbE

xStack Storage® Expansion JBOD for DSN-5110/5210/5410

DSN-5000-10

D-Link’s DSN-5000 series of iSCSI SAN arrays offer H.A. capability in a data center-class network storage solution ideal for small to medium enterprises.

Find out more

  • Expansion JBOD
  • DSN-5110-10
  • DSN-5210-10
  • DSN-5410-10

xStack Storage® 4x1GbE H.A. Capable iSCSI SAN Array

DSN-5110-10

The maximum number of drive members on a volume is the following:
RAID-1 and RAID-10: 32 HDDs
RAID-5: 17 HDDs
RAID-O: 16 HDDs

Embedded Centralized Storage Management
All of the D-Link xStack Storage products share a common easy-to-use configuration and management GUI console that allows you to manage multiple units from a single screen. The intuitive wizards ensure you will have your SAN out of the box and ready to go in minutes.

The embedded, user-friendly IP-SAN Device Manager (IDM) provides a comprehensive console for system management. Boasting a rich set of management features, this suite of utilities allows monitoring and control of the SAN array via the Storage Management Initiative-Specification (SMI-S) command set. With a secure server, users can remotely configure and monitor their SAN arrays over the Internet.

Advanced Management Features
The DSN-5110-10 also provides an advanced set of features for efficient management and optimal storage performance.

For the fastest RAID performance offered in the industry, D-Link’s adaptive cache management provides write coalescing and multi-stream read-ahead on a volume basis, optimizing cache utilization and performance in an application-dependant manner. Volatile cache data protection is afforded via an on-board battery supporting 2GB of cache memory for a minimum of 72 hours. A write-back or write-through cache memory policy can be selected manually or automatically, depending on the status of the battery’s charge.

The DSN-5110-10 supports jumbo frames and VLAN tagging to segregate traffic into isolated zones for secure access, improving network throughput and reducing CPU overhead.

D-Link’s volume virtualization technology utilizes the concept of storage extents, which are the fundamental building blocks used to enable features such as RAID, online capacity expansion, volume reconfiguration and migration. Each disk drive can contain multiple and divergent RAID configurations instead of requiring dedication to a single RAID set. This technology allows for the support of mixed disk drive capacities for volume creation. Volume capacity expansion and RAID level migration are performed online with minimal impact to users. Additionally, volume growth can occur without volume migration or reconstruction. Users can quickly deploy a SAN and simply add more drives as needed.

An iSCSI SAN array can prove to be a valuable tool to supplement a network storage foundation. Whether providing a low-cost block-based solution for data backup and recovery, replacement of Direct Attached Storage (DAS) or providing a primary storage solution, the DSN-5110-10 will provide the performance and functionality needed.

1 SATA Drive support for single controller configuration only.

Find out more

  • 2U Rackmount
  • Up to 96TB
  • GbE Connectivity
  • 4xGbE

xStack Storage® 8x1GbE H.A. Capable iSCSI SAN Array

DSN-5210-10

The maximum number of drive members on a volume is the following:
RAID-1 and RAID-10: 32 HDDs
RAID-5: 17 HDDs
RAID-O: 16 HDDs

Embedded Centralized Storage Management
All of the D-Link xStack Storage products share a common easy-to-use configuration and management GUI console that allows you to manage multiple units from a single screen. The intuitive wizards ensure you will have your SAN out of the box and ready to go in minutes.

The embedded, user-friendly IP-SAN Device Manager (IDM) provides a comprehensive console for system management. Boasting a rich set of management features, this suite of utilities allows monitoring and control of the SAN array via the Storage Management Initiative-Specification (SMI-S) command set. With a secure server, users can remotely configure and monitor their SAN arrays over the Internet.

Advanced Management Features
The DSN-5210-10 also provides an advanced set of features for efficient management and optimal storage performance.

For the fastest RAID performance offered in the industry, D-Link’s adaptive cache management provides write coalescing and multi-stream read-ahead on a volume basis, optimizing cache utilization and performance in an application-dependant manner. Volatile cache data protection is afforded via an on-board battery supporting 2GB of cache memory for a minimum of 72 hours. A write-back or write-through cache memory policy can be selected manually or automatically, depending on the status of the battery’s charge.

The DSN-5210-10 supports jumbo frames and VLAN tagging to segregate traffic into isolated zones for secure access, improving network throughput and reducing CPU overhead.

D-Link’s volume virtualization technology utilizes the concept of storage extents, which are the fundamental building blocks used to enable features such as RAID, online capacity expansion, volume reconfiguration and migration. Each disk drive can contain multiple and divergent RAID configurations instead of requiring dedication to a single RAID set. This technology allows for the support of mixed disk drive capacities for volume creation. Volume capacity expansion and RAID level migration are performed online with minimal impact to users. Additionally, volume growth can occur without volume migration or reconstruction. Users can quickly deploy a SAN and simply add more drives as needed.

An iSCSI SAN array can prove to be a valuable tool to supplement a network storage foundation. Whether providing a low-cost block-based solution for data backup and recovery, replacement of Direct Attached Storage (DAS) or providing a primary storage solution, the DSN-5210-10 will provide the performance and functionality needed.

1 SATA Drive support for single controller configuration only.

Find out more

  • 2U Rackmount
  • Up to 168TB
  • GbE Connectivity
  • 8xGbE

Copyright © 2012 D-Link Corporation/D-Link Systems, Inc.

Select countryUS