Cookies
Our website uses cookies. By using the site you agree to our Cookie Policy. Learn more
OK

Support


Datasheets
Version Date Type File Size
-
-
-
Manuals
Version Description Date Type File Size
-
Show moreShow less
-
-
-
Firmware
Warning: Please do NOT upgrade firmware through wireless unless the device only has wireless connection. Doing so may damage the unit.
Version Description Date
Firmware
Show moreShow less
08/10/2010
Software
Version Description Date
-
Show moreShow less
-
Additional Downloads
Version Description Date
-
Show moreShow less
-
Support    
  • Fully Compliant with IEEE 802.3/802.3u/802.3ab/802.3z Standard
  • ANSI/IEEE 802.3 NWay auto-negotiation
  • MDI/MDI-X Auto-detection
  • IEEE 802.3x Flow Control in Full-duplex, Back Pressure in Half-duplex

DES-6500 Chassis System    
  • Number of User-configurable Slots: 8
  • 2 Redundant Power Supply Bays
  • Backplane Switch Fabric Bandwidth: 160Gbps
  • Up to 96Gigabit Ethenet Ports
  • Up to 192 Fast Ethernet Ports
  • 3k IP Address, 16K MAC address, 4K VLAN (max.)
  • 8 Hardware Priority Queues
  • 32 Trunking Group, 8 port/Group
  • RAM Buffer: 128MB per Line Card, 256MB of CPU card

DES-6502 CPU/Fabric Switching Module (Shipped with DES-6500)    
  • RS-232 Console Port (DB9) : DCE, 115200, N, 8, 1
  • Reset, Alarm Off Buttons
  • System, Power LED
  • 160 Gbps Switching Capacity
  • Up to 142 Mpps Forwarding Rate Support
  • 256MB SDRAM
  • 512KB for Boot code and 16 MB for Runtime code

DES-6504 12 port 100BASE-FX MMF LC Module  
 
  • Fully compliant with IEEE 802.3u 100BASE-FX
  • IEEE 802.3x compliant Flow Control support for Full-duplex
  • Supports (SFF) LC type connections
  • Cable distances up to 2km in full duplex on Multi-Mode Fiber
DES-6506 24-port RJ-21 to RJ-45 Patch Panel    
  • Patch panel support 2 RJ-21 ports to 24-port RJ-45 10/100 BASE-TX Interface
  • Compatible with the DES-6510 RJ-21 Telco Module
  • Use in conjunction with DES-6510 module
  • Supports 2 RJ-21/Telco 50 connectors
  • 1U high

DES-6507 12-port 10/100/1000Base-T + 2SFP Combo Module  
 
  • Fully Compliant with IEEE 802.3/802.3u/802.3ab/802.3z Standard
  • ANSI/IEEE 802.3 NWay auto-negotiation
  • MDI/MDI-X Auto-detection
  • IEEE 802.3x Flow Control in Full-duplex
  • 10BASE-T Copper Cable:
  • 2-pair UTP CAT 3,4, 5 (100m max)
  • EIA/TIA-568 100-ohm STP (100m max.)
  • 100BASE-TX/1000BASE-T Copper Cable:
  • 2-pair or 4 pair UTP CAT 5 or Better (100m max.)
  • EIA/TIA-568 100-ohm STP (100m max.)
  • Fiber Cables: 50, 62.5/125 Micron Multimode Fiber, 9 Micron Singlemode Fiber
  • LED report (per port): Link/Act

DES-6508 16-port 10BASE-T/100BASE-TX RJ-45 Fast Ethernet Switch module  
 
  • Fully compliant with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX
  • All 10/100Mbps ports support auto-negotiation
  • Back pressure Flow Control support for Half-duplex mode
  • IEEE 802.3x compliant Flow Control support for Full-duplex

DES-6509 12-port 1000Base-X SFP Fiber Module    
  • Fully Compliant with IEEE 802.3z Standard
  • IEEE 802.3x Flow Control in Full-duplex
  • Fiber Cables: 50, 62.5/125 Micron Multimode Fiber, 9 Micron Singlemode Fiber
  • LED report (per port): Link/Act

DES-6510 24 Port 10/100Mbps RJ-21 Telco 50 Module    
  • 2 RJ-21, each support 12-port 10BASE-T/100BASE-TX ports
  • Fully compliant with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX
  • All 10/100Mbps ports support auto-negotiation
  • Back pressure Flow Control support for Half-duplex mode
  • IEEE 802.3x compliant Flow Control support for Full-duplex

DES-6511 Power Supply    
  • Full Redundant Feature Design
  • Hot-swappable Power Source
  • Power Management Function Enabled
  • 2 Fans Included
  • Removable Handle Design
  • Input: 90 ~ 264 VAC, 47 ~ 63 Hz
  • Output: 3.3V:4A ~ 80 A; 12V: 0.1A ~2A

DES-6512 2 Port 10G XFP module for DES-6500 chassis    
  • IEEE 802.3ae compliance
  • Support Full-Duplex operation only
  • Support XFP MSA compliant transceivers
  • 256MB SDRAM
  • Flash: 512KB for boot code, 16MB for runtime code
  • LED indicators

Network Cable    
  • 10Base-T:
  • 2-pair UTP CAT 3,4, 5
  • EIA/TIA-568 100-ohm STP
  • 100Base-TX/1000Base-T:
  • 2-pair or 4 pair UTP CAT 5 or Better
  • EIA/TIA-568 100-ohm STP
  • 1000Base-SX:
  • 50, 62.5/125 Micron Multimode Fiber
  • 1000Base-LX:
  • 50, 62.5/125 Micron Multimode Fiber
  • 9 Micron Singlemode Fiber