Support

Product Status - Phased Out

DAP-1522 - Revision A

Hardware revisions
Downloads can vary across product revisions.

Quick Links

Firmware
Do NOT upgrade firmware on any D-Link product over a wireless connection. Failure of the device may result. Use only hard-wired network connections.
Version Description Date
Download 1.41b02
Firmware 1.41b02 for DAP-1522
Show moreShow less
22/02/2013
Additional Downloads
Version Description Date
Download
CE Declaration A1 (English, French)
Show moreShow less
Manuals
Description Type File Size
Download
Manual (English)
Show moreShow less
PDF 8.08mb
Quick Installation Guides
Version Description Date Type File Size
Download
Quick Installation Guide (English)
Show moreShow less
PDF 2.51mb
  • Wireless N performance in 2 selectable frequency ranges: 2.4 GHz or 5 GHz
  • 4 Ethernet ports to wirelessly connect all the devices in your entertainment center to your network
  • Handles multiple HD video streams
  • Certified for Wi-Fi Protected Setup™ (WPS) specification

Wireless N Dualband Access Point and Ethernet Bridge
The DAP-1522 allows you to easily upgrade any router to support streaming of High-Definition (HD) multimedia content in your home over a wireless connection. This device will let you ‘bridge’ between two different physical media, for example the wired Ethernet connection from the DVR and the wireless media of your wireless network. It transforms your wired device into a wireless one without any hassles of stringing cable wires.



High Definition performance
The DAP-1522 allows you to easily upgrade any router to support streaming of High-Definition (HD) multimedia content over a wireless connection. Connect up to four Ethernet-enabled devices of your entertainment center to the DAP-1522, such as game consoles, Digital Video Recorders (DVR), and Digital Media Adapters (DMA) simultaneously. You can also upgrade your network to support dualband wireless streaming by connecting a DAP-1522 to your router.



Expansion into the clear 5 GHz radio spectrum
The 5 GHz radio frequency is wider and less crowded than the 2.4GHz radio frequency used by most wireless devices (including consumer devices such as cordless phones, baby monitors, bluetooth adapters etc) today. With up to 23 non-overlapping channels available on the 5GHz radio band, compared to only 3 on the 2.4 GHz band, users are sure to experience the full speed needed to run even the most delay sensitive applications, such as streaming multiple HD videos across the network.



Simplified wireless security
The DAP-1522 is certified for the Wi-Fi Alliance’s standard for wireless security at the touch of a button, Wi-Fi Protected Setup™ (WPS). With it, the wireless network name (SSID) and encryption keys are automatically generated and broadcast to the client devices. There is no need to memorize complicated passwords and key them in several times. This considerably simplifies the process of setting up security on the wireless network.




Actual product appearance may differ from the image displayed on this page

Hardware
  • Four 10/100/1000 Mbps Gigabit LAN ports
  • Internal antenna
Wireless
  • Dualband technology, up to 300 Mbps in each frequency band
  • IEEE 802.11n (draft 2.0) Wireless LAN specification, Wi-Fi certified
  • Selectable 2.4GHz and 5GHz Wireless N operation
  • Backward compatible with 802.11a/g wireless networks
  • Simple wireless encryption set up at the touch of a button (Wi-Fi Protected Setup)
Security
  • 64/128-bit WEP
  • WPA™- PSK, WPA2 ™- PSK (Wi-Fi Protected Access)
  • WPS (Wi-Fi Protected Setup)
Management
  • Three operation modes; AP, Bridge and Auto
  • Web-based management
Warranty
  • 2-year warranty