How to setup DCS-8000LH using mydlinkLite App ?

In order to install your DCS-8000LH, you will need to download the free mydlink Lite app on your smartphone or tablet by scanning the QR code in below or by searching for mydlink Lite in the Apple App Store or Google Play for your device.

DLink DCS 8000LH FAQ Eng


Once installed, launch the mydlink Lite app. Then create a new account or log in to your existing account. The app will guide you through the rest of the configuration process.


Note (1): Before launching the app, make sure your mobile device is connected to the Wi-Fi network (i.e., router) you want to connect the camera to.


Note (2): To log in to your account, enter your mydlink email address and password. Then, tap Sign In to continue. If you forgot your mydlink password, tap Forgot password? If you do not have a mydlink account, tap Sign up and follow the instructions to create a mydlink account.

Note (3): Please turn on the Bluetooth function of your mobile device during the camera installation.

DLink DCS 8000LH FAQ Eng

Method 1: With QR Code Installation:
Step 1: Tap Add a New Camera



DLink DCS 8000LH FAQ Eng


Step 2: To scan a QR code, use the code on the label attached to the bottom of your device.



DLink DCS 8000LH FAQ EngDLink DCS 8000LH FAQ Eng


Step 3: Wait until the LED blinks orange, then tap Ready.



DLink DCS 8000LH FAQ Eng


Step 4: Choose a Wi-Fi with a robust signal.


DLink DCS 8000LH FAQ Eng


Step 5: Set a password to protect your camera.


Note: If you forget your password, you must reset the camera. Unfortunately, this process will change your settings back to factory default. To reset the camera, keep the camera powered on and use an unfolded paper clip to hold the reset button down for 10 seconds.



DLink DCS 8000LH FAQ EngDLink DCS 8000LH FAQ Eng


Step 6: Tap YES to add the device to your mydlink account.



DLink DCS 8000LH FAQ EngDLink DCS 8000LH FAQ Eng



Step 7: The Remote devices screen will display the device you have registered with your mydlink account.


DLink DCS 8000LH FAQ Eng



Step 8: Tap the DCS-8000LH camera. The current live view of the camera will be displayed.


Method 2: Without QRCode Installation:

Step 1: Tap Add a New Camera



DLink DCS 8000LH FAQ Eng


Step 2: Select No if you don’t have QR Code, and choose Model Name.

DLink DCS 8000LH FAQ EngDLink DCS 8000LH FAQ Eng



Step 3: Follow the instruction to plug the adapter, and tap Next. Wait your camera blinks orange and tap
Ready.
DLink DCS 8000LH FAQ EngDLink DCS 8000LH FAQ Eng


Step 4: Select DCS-8000LH and enter the PIN Code (On the bottom of camera)


DLink DCS 8000LH FAQ EngDLink DCS 8000LH FAQ Eng


Step 5: Choose a Wi-Fi you are using with strong signal, and enter your Wi-Fipassword.



DLink DCS 8000LH FAQ EngDLink DCS 8000LH FAQ Eng



Step 6: Set a password to protect your camera



DLink DCS 8000LH FAQ Eng

Note : This document is also suitable for the DCS-8100LH
Rank: 6

These may also help:

  • How to setup DCS-8000LH using mydlinkLite App ? Read Answer
  • Does my DCS-8000LH support SD Card recording ? Read Answer
  • How to setup Motion detection ? Read Answer
  • How to send Email Notification from my DCS-8000LH when a Motion is detected ? Read Answer
  • How to setup Sound detection ? Read Answer
  • How to send Email Notification from my DCS-8000LH when a Sound is detected ? Read Answer
  • Does my DCS-8000LH support Night Vision ? Read Answer
  • Does my DCS-8000LH support Bluetooth ? How does it work ? Read Answer
  • Does my DCS-8000LH support extender mode ? Read Answer
  • Does my DSC-8000LH support 2-way audio ? Read Answer
  • How to access my DCS-8000LH camera remotely ? Read Answer
  • How to check the mac address of my camera ? Read Answer
  • How to update the firmware ? Read Answer
  • I can’t receive the verification e-mail for my mydlink account Read Answer
  • What can I do if my DCS-8000LH is not working correctly ? Read Answer
  • What Mobile app can work with my DCS-8000LH ? What are the system requirements of the Mobile App ? Read Answer