Cookies
Our website uses cookies. By using the site you agree to our Cookie Policy. Learn more
OK

Support


Datasheets
Version Date Type File Size
-
-
-
Firmware
This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:
 
http://tsd.dlink.com.tw/GPL.asp
 
The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.

Warning: Please do NOT upgrade firmware through wireless unless the device only has wireless connection. Doing so may damage the unit.
Version Description Date
Firmware
Show moreShow less
14-07-2016
Software
Version Description Date
-
Show moreShow less
-
Additional Downloads
Version Description Date
-
Show moreShow less
-

Technical Specifications

General

Standards

  • IEEE 802.3u/x/z
  • IEEE 802.3af        
  • SATA II/III
  • Auto MDI/MDI-X

HDD2

  • Format Disk
  • Up to 16 TB HDD
  • EXT3 file system
  • RAID 0, 1, JBOD4

Two Reset Modes

  • Reset firmware GUI button
  • HW reset button (hold for 10 seconds)

Reset Button

  • Reset to factory default  

Flash ROM

  • 128 MB       

RAM

  • 1024 MB DDR3    

Network Interface

  • Gigabit Ethernet port (10/100/1000 Mbps) 

I/O Ports

  • 1 x 10/100/1000 BaseT RJ-45 port
  • 4 x 10/100 BaseT PoE port (802.3af)
  • HDMI (supports 720p and 1080p resolution with 16:9 display ratio)
  • D-sub for VGA output
  • 1 x USB 3.0 port3
  • 1 x USB 2.0 port3
  • 3.5 mm audio input x 1, output x 1
  • 4 x DI, 1 x DO

Cooling

  • 1 x Smart Fan      

Software Features

Supported Cameras

  • Please visit www.dlink.com for a list of supported cameras1
  •  Supports auto-discovery and megapixel resolution

System Requirements for Web Interface

  • Browser: Internet Explorer, Firefox, or Safari        

Recording Performance

  • Max recording bitrate: 80 Mbit/s
  • Primary video profile:
    • H.264 at 1080p at 480 fps
    • Secondary video profile:
      • H.264 at VGA at 240 fps

Camera Search

  • UPnP
  • ONVIF

Audio and Video Recording

  • Synchronised audio & video recording        

Compression Format

  • H.264, MPEG-4, M-JPEG

Audio Compression Format

  • G.711, G.726       

Video Setting

  • Resolution
  • Quality
  • Bitrate
  • Frame rate
  • Enable audio
  • Video profile selection

Recording Mode

  • Record by schedule, manual, always, and event-based recording      
  • Motion-triggered recording

Alarm Recording

  • Pre-alarm: 60 seconds per channel
  • Post-alarm: 300 seconds per channel

Remote Live View

  • Supported via browser and Multi NVR Viewer (DCS-260) software

Remote Live View Control

  • Live view
  • Preset/Go to Preset
  • Patrol/Auto Patrol
  • Focus
  • PTZ control
  • Snapshot
  • Full screen
  • Auto scan
  • Digital zoom (Zoom in & Zoom out)
  • Manual Record
  • Audio Enable
  • Adjust audio volume
  • Video layout
  • e-map

Remote Playback Control

  • Normal
  • Fast forward/rewind
  • Step forward/rewind

Remote Playback

  • Supported via browser and Remote Playback application
  • Playback system with timeline GUI, search by event, area, cameras, date, and time
  • Browser or Remote Playback support 16-channel simultaneous playback
  • Digital zoom

Overwrite Recording

  • Auto recycling when disk storage is full       

File Export

  • Local: Export videos to AVI / MP4 format
  • Remote: Export videos to AVI or ASF file
  • Export images to JPG file

Digital Watermark Tool

  • Prevents recorded video files/snapshots from being tampered with    
  • Acts as a tool for verification

User Account

  • Additional accounts can be created to allow users system access and specify authorization for camera channels, PTZ, etc.

DDNS

  • D-Link DDNS and DynDns server support
  • Manual DDNS

System Time

  • D-Link NTP
  • Input time
  • Sync with computer
  • Daylight saving time

Auto Backup

  • Backup recorded data to USB/SAMBA/FTP via a schedule

Remote Backup

  • Remote backup software can backup raw data to redundant storage

System Status

  • Camera status
  • HDD status
  • System status
  • Network Service

Protocols

  • IPV4, ARP, TCP, UDP, ICMP
  • DHCP Server/Client
  • NTP Client
  • DNS Client
  • DDNS Client
  • SMTP Client
  • FTP Client
  • HTTP Server
  • RTP
  • RTCP
  • RTSP
  • IP filtering
  • UPnP
  • CoS
  • QoS/DSCP
  • HTTPS
  • Samba
  • Bonjour
  • SNMP v1/v2c/v3
  • PPPoE
  • DDP

User Interface

  • HTTP Web browser
  • NVR Search Utility
  • Remote Playback/Backup
  • Verification tool
  • Mobile app
  • GUI via HDMI/VGA

Package Contents

  • JustConnect 16-Channel PoE Network Video Recorder
  • Power Adapter
  • Ethernet Cable
  • Quick Installation Guide
  • CD-ROM with:
    • Software
    • Product Documentation

Physical

Weight

  • 2.1 kg (4.63 lbs)  

Power Input

  • Input: 100 to 240 V AC, 50 to 60 Hz
  • Output: DC 48 V/1.85 A

Power Consumption

  • Max. 90 W  

PoE Budget

  • Per Port: Max. 15 W
  • Total: 45 W

Temperature

  • Operating: 0 to 40 ˚C (32 to 104 ˚F)
  • Storage: -20 to 70 ˚C (-4 to 158 ˚F)

Humidity

  • 5% to 90% non-condensing    

Certifications

  • CE
  • FCC
  • RoHS

Dimensions        

  • 63 x 225 x 300 mm

1 Please see the camera compatibility list.
2 Hard disks are not included. Supports hard disks up to 8 TB each for a total of 16 TB.
3 This port is used for firmware updates, video exports to USB drives, and backups. Connection to a USB mouse/keyboard is supported.
4 RAID 0 and RAID 1 mirroring requires the use of two internal SATA drives. To avoid data incompatibility in RAID 1 operation, use identical SATA drives from the same manufacturer. Formatted drive capacity for RAID 1 operation is dependent on the drive capacity of the lowest-sized drive. Some older generation SATA drives may not be compatible. Click here for a list of SATA drives that have been tested to work with the NVR.

Warranty Document
This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:
 
http://tsd.dlink.com.tw/GPL.asp
 
The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.