Description
D-Link's Fast Ethernet Media Converter translates transmission signals from 100BASE-TX cable to 100BASE-FX fiber optic cable, expanding network data transmission beyond the 100 meter range.
The D-Link DFE-855 is a Fast Ethernet media converter that translates transmission signals from a twisted-pair 100BASE-TX cable to 100BASE-FX fiber optic cable. It expands network data transmission distances beyond the 100 meter limitation of copper wire to a maximum of two kilometers by using fiber optic cable in full duplex.
The DFE-855 provides auto-sensing detection of full duplex or half duplex signaling. It has easy-to-read diagnostic LED's for continuos status reports on network speed, duplex media access control connection, and network traffic. The DFE-855 uses standard RJ-45 UTP/STP and SC fiber optic connectors and is IEEE 802.3u 100BASE-TX/FX compliant and operates with all devices that adhere to this standard.
Features
- 1 RJ-45 Port
- No AUI Cable Required
- Low-cost Alternative to Repeater
Specifications
| Number of ports | - 1 RJ-45 100BASE-TX
- One SC fiber optic 62.5/125 micron multi-mode
| | Transmission Speed of ports | 100Mb on both ports | | Duplex Support | Auto-senses full duplex on half duplex | | Cable Support | - 100BASE-TX connection supports UTP Cat. 5 UTP cabling
- 100BASE-FX connection supports Fiber Optic 62.5/125 micron
- Multi-mode cabling
| | Cable Distance | - 100BASE-TX: 100 meters
- 100BASE-FX: 400 meters/half duplex, 2 kilometers/full duplex
| | Standards Compliance | IEEE 802.3u 100BASE-TX/FX Fast Ethernet | | Protocol | CSMA/CD | | Topology | - UTP/STP/Star
- Fiber point to point converter
| | Power Consumption | 3.5 watts | | LED's | - Power
- TX/RX
- Link
- Full or Half
| | Operating Temperature | -10 degrees to 55 degrees C (14 degrees to 131 degrees F) | | Humidity | 5% to 90% non-condensing | | Classification | - FCC Class A
- CE Mark
- VCCI Class A
- C-Tick
|
|