How to connect Network Cameras to NVR?
This FAQ applies to the DNR-312L
If your network supports DHCP
1. Connect your Network Cameras to network and power on first.
2. Please insert the CD from the NVR package to your PC, the auto-run will bring up the Setup Wizard, please follow the instruction of the setup steps to setup NVR first.
3. Connect to NVR web page, it will automatically search and add Network Cameras.
If your network doesn't support DHCP
1. Connect your Network Cameras to network and power on first. Setup your Network Cameras with fixed IP address.
2. Please insert the CD from the NVR package to your PC, the autorun will bring up the Setup Wizard, please follow the instruction of the setup steps to setup NVR first.
1. Connect your Network Cameras to network and power on first.
2. Please insert the CD from the NVR package to your PC, the auto-run will bring up the Setup Wizard, please follow the instruction of the setup steps to setup NVR first.
3. Connect to NVR web page, it will automatically search and add Network Cameras.
If your network doesn't support DHCP
1. Connect your Network Cameras to network and power on first. Setup your Network Cameras with fixed IP address.
2. Please insert the CD from the NVR package to your PC, the autorun will bring up the Setup Wizard, please follow the instruction of the setup steps to setup NVR first.
3. Connect to NVR web page, manually input the Network Cameras IP address in the setup page.
Inne pomocne materiały:
- Can I use NVR as a NAS? Przeczytaj
- How can I delete the cameras binding with NVR? Przeczytaj
- How can I replace a failed disk drive? Przeczytaj
- How can I view my camera's Live Video for longer than one minute? Przeczytaj
- How many Cameras can connect to NVR? Przeczytaj
- What kind of Cameras can connect to NVR? Przeczytaj
- What kind of Hard Drive can be used with NVR? Przeczytaj
- How can I check the disk status? Przeczytaj
- How can I restore the default administrator's password? Przeczytaj