Support

Product Status - Live

DAP-3690 - Revision A1

Hardware revisions
Downloads can vary across product revisions.

Quick Links

Firmware
Do NOT upgrade firmware on any D-Link product over a wireless connection. Failure of the device may result. Use only hard-wired network connections.
Version Description Date
Download 1.00
Firmware
2.8.2012.
Software
Version Description Date
Download 1.00r05
AP Array Tool
2.8.2012.
Download 1.00
AP Manager 2
2.8.2012.
Additional Downloads
Version Description Date
Download A1
CE Declaration A1 (English, French, Spanish, Portuguese)
5.12.2012.
Datasheets
Description Type File Size
Download
Datasheet (English)
PDF 7.95mb
Manuals
Description Type File Size
Download
Manual (English)
PDF 3.32mb
Quick Installation Guides
Version Description Date Type File Size
Download
Quick Installation Guide (English)
PDF 1.55mb
Standards

  • IEEE 802.11a
  • IEEE 802.11n
  • IEEE 802.11g
  • IEEE 802.3ab
  • IEEE 802.3at
  • IEEE 802.3u
  • IEEE 802.3


Network management

  • Telnet, Secure Telnet (SSH)
  • Web Browser Interface
  • HTTP, Secure HTTP (HTTPS)
  • SNMP Support
  • D-View Module - Private MIB
  • AP Manager II
  • AP Array


Security

  • WPA/WPA2-Personal/Enterprise
  • 64/128-bit WEP
  • SSID Broadcast Disable
  • MAC Address Access Control
  • Rogue AP Detection
  • 802.1x Authentication
  • Wireless LAN Partition


VLAN/SSID support

  • Multiple SSID supports up to 16 (8 per radio)


Quality of Service (QoS)

  • 4 Priority Queues
  • WMM Wireless Priority


Wireless Frequency Range

  • 2.4 GHz (2.4 GHz to 2.4835 GHz)
  • 5 GHz (5.15 GHz to 5.35 GHz, 5.47 GHz to 5.85 GHz)


Operating modes

  • Access Point (AP)
  • WDS with AP
  • WDS
  • Wireless Client


Dipole antenna gain

  • 5 dBi @ 2.4 GHz
  • 7 dBi @ 5 GHz

Maximum Output Power

  • 20 dBm @ 2.4 GHz (dual chain)
  • 23 dBm @ 5 GHz (dual chain)


LEDs

  • Power
  • LAN
  • 5 GHz
  • 2.4 GHz


Maximum Power Consumption

  • 18 watts max. with PoE (with heater OFF)
  • 24 watts max. with PoE (with heater ON)


Power Voltage

  • 48V DC +/- 10% for PoE


Temperature

  • Operating: -40 to 60 °C
  • Storage: -40 to 65 °C


Humidity

  • Operating: 10% to 90% non-condensing
  • Storage: 5% to 95% non-condensing


Weight

  • 2.53 kg (without antennas)


Dimensions (W x H x D)

  • 250 x 220 x 70 mm


Accessories Provided

  • Four embedded surge arrestors
  • PoE base unit (PoE injector)
  • Grounding wire
  • Wall mounting kit
  • Pole mounting kit


Certifications


  • FCC
  • CE
  • IC
  • C-Tick
  • NCC
  • UL
  • Wi-Fi
  • IP67