How do I enable a new camera in D-ViewCam?

D-ViewCam is a powerful software package from D-Link which may be purchased separately. It is useful for monitoring a large network of up to 32 cloud cameras


Step 1: Launch the D-ViewCam console. Once the console loads, click on the General Settings icon, then Setting, and then click System Setting.



Step 2: Click on the Camera tab.



Step 3: Click Start Scan to automatically find the IP camera(s) that are on your Local Area Network (LAN).


Step 4: Select one of the IP cameras that are available by checking the box in the left-hand column. You may enter a new name for this camera and then enter the administrator username and password assigned to this camera in the fields provided. Click OK to add the camera.


Step 5: The pop-up window will close and the new camera should appear on the list.


If a camera does not support UPnP, you can manually add a camera as per the below instructions.


Step 1: Click Insert to manually add a network camera that is on your Local Area Network (LAN). The IP Camera Video/Server Setting window will appear.


Step 2: Enter the following network information for your camera:

• Name - Enter a name for your camera.

• IP Address - Enter the IP address of this camera. If you want to use a domain name, then check the DNS box and enter the domain name.

• HTTP Port - 80 is the default port.

• User Name - Enter the administrator user name for this camera.

• Password - Enter the administrator password for this camera.

• Protocol - Select TCP, UDP or HTTP.

Enter the following device information for your camera, or click Auto Detect to detect the vendor and model information.

• Vendor - Select the brand name from the dropdown menu.

• Camera Model - Select the camera model from the drop-down menu.

• Video Channel - Select the video channel you want to assign the camera


Step 3: Click OK to add your camera.

Rank: 1.5

Ceci peut également aider.