Cookies
Este sitio web utiliza cookies. Al continuar navegando acepta nuestra Política de Cookies. Más información
ACEPTAR

Soporte


Fichas técnicas
Versión Fecha Tipo Tamaño de archivo
-
-
-
Manuales
Versión Descripción Fecha Tipo Tamaño de archivo
-
Show moreShow less
-
-
-
Guías de instalación rápida
Versión Descripción Fecha Tipo Tamaño de archivo
-
Show moreShow less
-
-
-
Firmware
Advertencia: NO actualice el firmware a través de una conexión inalámbrica a no ser que su dispositivo sólo disponga de conexión inalámbrica. Podría provocar un fallo de la unidad.
Versión Descripción Fecha
Release notes included
Show moreShow less
20/02/2017
Software
Versión Descripción Fecha
-
Show moreShow less
-
Descargas adicionales
Versión Descripción Fecha
-
Show moreShow less
-

General

Port Standards & Functions

  • IEEE 802.3 10BASE-T Ethernet
  • IEEE 802.3u 100BASE-TX Fast Ethernet
  • IEEE 802.3ab 1000BASE-T Gigabit Ethernet
  • 802.3ae 10 GbE
  • IEEE 802.3x Flow Control for Full-Duplex Mode
  • Auto-negotiation

Number of Ports

  • DGS-1510-20 - 16 10/100/1000 Mbps, 2 Gigabit SFP, 2 10G SFP+
  • DGS-1510-28 - 24 10/100/1000 Mbps, 2 Gigabit SFP, 2 10G SFP+
  • DGS-1510-28X - 24 10/100/1000 Mbps, 4 10G SFP+
  • DGS-1510-28P - 24 10/100/1000 Mbps PoE capable, 2 Gigabit SFP, 2 10G SFP+
  • DGS-1510-28XMP - 24 10/100/1000 Mbps PoE capable, 4 10G SFP+ 
  • DGS-1510-52 - 48 10/100/1000 Mbps, 2 Gigabit SFP, 2 10G SFP+
  • DGS-1510-52X - 48 10/100/1000 Mbps, 4 10G SFP+
  • DGS-1510-52XMP - 48 10/100/1000 Mbps PoE capable, 4 10G SFP+

Network Cables

  • UTP Cat. 5, Cat. 5e (100 m max.)
  • EIA/TIA-568 100-ohm STP (100 m max.)

Full/Half Duplex

  • Full/half duplex for 10/100 Mbps and Gigabit speed

Media Interface Exchange

  • Auto or configurable MDI/MDIX

Performance

Switching Capacity

  • DGS-1510-20 - 76 Gbps
  • DGS-1510-28 - 92 Gbps
  • DGS-1510-28X - 128 Gbps 
  • DGS-1510-28P - 92 Gbps 
  • DGS-1510-28XMP - 128 Gbps
  • DGS-1510-52 - 140 Gbps
  • DGS-1510-52X - 176 Gbps
  • DGS-1510-52XMP - 176 Gbps

Transmission Method

  • Store-and-forward

MAC Address Table

  • 16,000 entries per device

MAC Address Update

  • Up to 512 static MAC entries
  • Enable/disable auto-learning of MAC addresses

Maximum 64 bytes Packet Forwarding Rate

  • DGS-1510-20 - 56.54 Mpps
  • DGS-1510-28 - 68.45 Mpps
  • DGS-1510-28X - 95.24 Mpps
  • DGS-1510-28P - 68.45 Mpps
  • DGS-1510-28XMP - 95.24 Mpps
  • DGS-1510-52 - 104.16 Mpps
  • DGS-1510-52X - 130.95 Mpps
  • DGS-1510-52XMP - 130.95 Mpps

Packet Buffer Memory

  • DGS-1510-20/28/28X/28P/28XMP - 1.5 MB per device
  • DGS-1510-52/52X/52XMP - 3 MB per device

PoE (DGS-1510-28P, DGS-1510-28XMP and DGS-1510-52XMP only)

PoE Standard

  • IEEE 802.3af, 802.3at

PoE Capable Ports

  • DGS-1510-28P/28XMP
    • Ports 1 to 24: Up to 30 W
  • DGS-1510-52XMP
    • Ports 1 to 48: Up to 30 W

PoE Power Budget

  • DGS-1510-28P
    • Max. 193 W
  • DGS-1510-28XMP/52XMP
    • Max. 370 W

Physical & Environment

AC Input

  • 100 to 240 VAC 50/60 Hz internal universal power supply

Maximum Power Consumption

  • DGS-1510-20 - 20.3 W
  • DGS-1510-28 - 24 W
  • DGS-1510-28X - 22.3 W
  • DGS-1510-28P – 238.7 W (PoE on), 29 W (PoE off)
  • DGS-1510-28XMP - 436.3 W (PoE on),  38.4 W (PoE off)
  • DGS-1510-52 - 38.4 W
  • DGS-1510-52X - 44.2 W
  • DGS-1510-52XMP - 486.9 W (PoE on)

Standby Power Consumption

  • DGS-1510-20 - 12.2 W
  • DGS-1510-28 - 15.2 W
  • DGS-1510-28X - 15.2 W
  • DGS-1510-28P -21 W
  • DGS-1510-28XMP - 28.3 W
  • DGS-1510-52 - 27.6 W
  • DGS-1510-52X - 28.9 W
  • DGS-1510-52XMP - 40.1 W

Smart Fan Quantity

  • DGS-1510-20/28/28X – 1
  • DGS-1510-28P/28XMP/52/52X – 2
  • DGS-1510-52XMP – 4

Acoustics

  • DGS-1510-20 - 43.8 dB(A)
  • DGS-1510-28 - 43.8 dB(A)
  • DGS-1510-28X - 42.7 dB(A) 
  • DGS-1510-28P – 46.4 dB(A)
  • DGS-1510-28XMP - 56.9 dB(A)
  • DGS-1510-52 - 44.2 dB(A)
  • DGS-1510-52X - 45.8 dB(A)
  • DGS-1510-52XMP - 55.4 dB(A)

Heat Dissipation

  • DGS-1510-20 - 41.602 BTU/hr
  • DGS-1510-28 - 72.292 BTU/hr
  • DGS-1510-28X - 76.043BTU/hr
  • DGS-1510-28P – 813.967 BTU/hr
  • DGS-1510-28XMP - 1487.78 BTU/hr
  • DGS-1510-52 - 130.944 BTU/hr
  • DGS-1510-52X - 138.787 BTU/hr
  • DGS-1510-52XMP -  BTU/hr

Operation Temperature

  • -5 to 50 ˚C (23 to 122 ˚F)

Storage Temperature

  • -20 to 70˚C (-4 to 158 ˚F)

Operation Humidity

  • 0% to 95% non-condensing

Storage Humidity

  • 0% to 95% non-condensing

Dimensions

  • DGS-1510-20 - 280 x 180 x 44 mm (11 x 7.09 x 1.73 inches)
  • DGS-1510-28 - 440 x 210 x 44 mm (17.36 x 8.26 x 1.73 inches)
  • DGS-1510-28X - 440 x 210 x 44 mm (17.36 x 8.26 x 1.73 inches)
  • DGS-1510-28P - 440 x 250 x 44 mm (17.36 x 9.84 x 1.73 inches)
  • DGS-1510-28XMP - 440 x 308 x 44 mm (17.36 x 12.12 x 1.73 inches)
  • DGS-1510-52 -  440 x 250 x 44 mm (17.36 x 9.84 x 1.73 inches)
  • DGS-1510-52X -  440 x 250 x 44 mm (17.36 x 9.84 x 1.73 inches)
  • DGS-1510-52XMP - 440 x 308 x 44 mm (17.36 x 12.12 x 1.73 inches)

Weight

  • DGS-1510-20 - 1.24 kg
  • DGS-1510-28 - 2.00 kg
  • DGS-1510-28X - 2.00 kg
  • DGS-1510-28P – 2.54 kg
  • DGS-1510-28XMP - 4.25 kg
  • DGS-1510-52 - 2.40 kg
  • DGS-1510-52X - 2.40 kg
  • DGS-1510-52XMP - 5.41 kg

Diagnostic LEDs

  • Power/Stacking ID/Fan (per device)
  • Power/Stacking ID/Fan Error/PoE Push Button (per device) (for DGS-1210-28P only)
  • Link/Activity/Speed (per 10/100/1000 Mbps port)
  • Link/Activity/Speed/PoE Mode (per 10/100/1000 Mbps port) (for DGS-1210-28P only)
  • Link/Activity/Speed (per Gigabit SFP port)
  • Link/Activity/Speed (per 10G SFP+ port)

Certifications

  • CE
  • FCC
  • C-Tick
  • VCCI
  • BSMI 

Safety

  • cUL
  • CB

Software Features

Stackability

  • Virtual Stacking Support
    • D-Link Single IP Management
    • Up to 32 devices per virtual stack
    • Up to 20G stacking bandwidth
  • Physical Stacking1
    • Supports Duplex Chain/Ring topology
    • Up to 40G stacking bandwidth full duplex
    • Up to 6 units per stack

L2 Features

  • MAC Address Table: Up to 16,384
  • Flow Control
    • 802.3x Flow Control
    • HOL Blocking Prevention
  • Jumbo Frame up to 9,216 Bytes
  • IGMP Snooping
    • IGMP v1/v2 Snooping
    • IGMP v3 awareness
    • Supports 512 IGMP groups
    • Supports 128 static multicast addresses
    • IGMP per VLAN
    • Supports IGMP Snooping Querier
    • Host-based IGMP Snooping Fast Leave
  • MLD Snooping
    • Supports MLD v1/v2 awareness
    • Supports 512 groups
    • Supports 128 Static Multicast Addresses
    • Per VLAN MLD Snooping
    • Host-based MLD Fast Leave
    • MLD Snooping Querier
  •  Spanning Tree Protocol
    • 802.1D STP
    • 802.1w RSTP
    • 802.1s MSTP
  • Loopback Detection v4.07
  •  802.3ad Link Aggregation
    • Max. 32 groups per device/8 ports per group
  • Port Mirroring
    • Support 4 mirroring groups
    • One-to-One, Many-to-One
    • Supports Mirroring for Tx/Rx/Both
  • Multicast Filtering
    • Forwards all unregistered groups
    • Filters all unregistered groups
  • Ethernet Ring Protection Switching (ERPS)

VLAN

  • 802.1Q Tagged VLAN
  • 4K VLAN Groups
  • Configurable VID: 0~4094
  • GVRP
  • Asymmetric VLAN
  •  Auto Voice VLAN
  • Auto Surveillance VLAN  2.1
  • MAC-based VLAN
  • Protocol-based VLAN

Quality of Service (QoS)

  • CoS based on
    • 802.1p priority
    • VLAN
    • MAC address
    • Ether type
    • IP address
    • DSCP
    • Protocol type
    • TCP/UDP port number
    • DSCP of IPv6 Traffic Class
    • IPv6 flow label
  • 802.1p Quality of Service
  • Queue Handling
    • Strict Priority Queue (SPQ)
    • Weighted Round Robin (WRR)
    • Deficit Round Robin (DRR)
    • SPQ + WRR
  • 8 queues per port
  • Bandwidth Control
    • Port-based (Ingress/Egress, min. granularity for 10/100/1000 BASE-T ports is 64 Kb/s)

L3Features

  • ARP
    • 256 Static ARP
    • Supports Gratuitous ARP
  • IPv6 Neighbour Discovery (ND)
  • 16 IP interfaces
  • Default Routing
  • Static Routing
    • 64 IPv4 Static Route Entries
    • 32 IPv6 Static Route Entries
  • UDP helper

Access Control List (ACL)

  • ACL based on
    • 802.1p priority
    • VLAN
    • MAC address
    • Ether type
    • IP address
    • DSCP
    • Protocol type
    • TCP/UDP port number
    • DSCP of IPv6 Traffic Class
    • IPv6 flow label
  • ACL Actions
    • Permit
    • Deny
  • Max. 256 access list
  • Max. 768 rules
  • Single or multiple ports (each rule)
  • Time-based ACL
  • ACL Statistics

Security

  • Port Security
    • Supports up to 128 MAC addresses per port
  • Broadcast/Multicast/Unicast Storm Control
  • Dynamic ARP Inspection
  • D-Link Safeguard Engine
  • DHCP Server Screening
  • ARP Spoofing Prevention
    • Max. 64 entries
  • SSH
    • Supports v2
    • Supports IPv4/IPv6
  • BPDU Attack Protection
  • DoS Attack Prevention
  • SSL
    • Supports v1/v2/v3
    • Supports IPv4/IPv6
  • Traffic Segmentation
  • IP-MAC-Port Binding
    • DHCP snooping  
    • IP Source Guard  
    • Dynamic ARP Inspection  
    • IPv6 DHCP Guard
    • IPv6 RA Guard
    • IPv6 Snooping
    • IPv6 Source Guard
    • IPv6 ND Inspection

AAA

  • Compound Authentication
  • 802.1X Port and MAC-based Authentication
    • Supports RADIUS and Local Server
    • Supports EAP, OTP, TLS, TTLS, PEAP
  • Web-based Access Control (WAC)
    • Port-based Access Control
    • Host-based Access Control
    • Dynamic VLAN Assignment
  • Guest VLAN
  • RADIUS and TACACS+ authentication for switch access
  • RADIUS and TACACS+ accounting
  • MAC-based Access Control (MAC)
    • Port-based Access Control
    • Host-based Access Control
    • Dynamic VLAN Assignment
  • Japan Web-based Access Control (JWAC)
    • Port-based Access Control
    • Host-based Access Control
    • Dynamic VLAN Assignment

OAM

  • Cable Diagnostics
  • sFlow
  • Factory Reset

Management

  • Command Line Interface (CLI)
  • Telnet Server
  • TFTP Client
  • IPv6 Neighbor Discovery
  • Configurable MDI/MDIX
  • SNMP
    • Supports v1, v2c, v3
  • SNMP Trap
  • System Log
    • Max. 10,000 log entries
  • Debug command
  • Dual images
  • Surveillance mode
  •  DHCP Client
  • D-Link Network Assistant support
  • SNTP
  • ICMPv6
  • IPv4/v6 Dual Stack
  • DHCP Auto Configuration
  • RMON v1
  • LLDP, LLDP-MED
  • DHCP relay
  • Web-based GUI
  • TFTP Client
  • NTP
  • Telnet client (supports CLI only)

D-Link Green 3.0 Technology

  • Power Saving by:
    • Link Status
    • LED or Port Shutoff
  •  System Hibernation mode
  • Time-based PoE (PoE models only)

Optional 10G SFP+ Transceivers

  • DEM-431XT - 10GBASE-SR SFP+ transceiver (w/o DDM), 80 m: OM1 & OM2 MMF, 300 m: OM3 MMF
  • DEM-432XT - 10GBASE-LR SFP+ transceiver (w/o DDM), 10 km

Optional 1G SFP Transceivers

  • DEM-310GT - 1000BASE-LX SFP transceiver, single-mode fiber, 10 km, 3.3 V operating voltage
  • DEM-311GT - 1000BASE-SX SFP transceiver, multi-mode fiber, 550 m, 3.3 V operating voltage
  • DEM-312GT2 - 1000BASE-SX SFP transceiver multi-mode fiber, 2 km, 3.3 V operating voltage

Optional 10G SFP+ Direct Attach Cables

  • DEM-CB100S - 10G SFP+ to SFP+ 1 m Direct Attach Cable
  • DEM-CB300S - 10G SFP+ to SFP+ 3 m Direct Attach Cable
1 When stacking in a linear typology, the remaining unused SFP+ ports in the stacking port pair of the top and bottom switches will also be considered occupied by the switch and cannot be used for any other purpose.

Documento de garantía