Adaptador Power Over Ethernet (PoE)

DWL-P200

Compartir
Power Over Ethernet Adapter

The DWL-P200 Power Over Ethernet (PoE) adapter kit is designed to supply operational power to surveillance cameras and wireless LAN devices such as access points, bridges and routers. It enables power current to travel on the Ethernet network cable, thus eliminates the need to directly connect a power supply to the wireless LAN device. The DWL-P200 supports both 5VDC and 12VDC power requirements. Power requirement can be selected through a DIP switch.

Facilitates Installation

The Power Over Ethernet allows you to install the wireless LAN device and surveillance camera at places such as on a building rooftop, on or near a ceiling, or other difficult places where power is not easily accessible. The idea is increase the usefulness of your camera and wireless LAN to provide connectivity to users regardless of their proximity to a power outlet or a network cable.

Data and DC Power Transmission on the Same Network Cable

On a standard UTP Category 5 cable, only two pairs (pins 1, 2, 3 and 6) are used for Ethernet data transfer. Power Over Ethernet is designed to take advantage of the unused pins of the remaining pair of cable wires. Consequently, a single Category 5 cable will now carry both Ethernet data and DC power. The idea is to supply the remote end with power and the requirements of Ethernet connectivity via a single Cat 5 cable.

Base Unit and Terminal Unit

The DWL-P200 includes a base unit and a terminal unit. At one end, the base unit inserts DC voltage into the unused wires (pins 4, 5, 7 and 8) of the network cable. At the other end, the terminal unit splits the data and DC power apart. Data signals continue to travel on remaining network cables, while DC power is fed into the power adapter, which connects to an AC power outlet.

Actual product appearance may differ from the image displayed on this page
  • Proporciona alimentación CC por medio del cable de categoría 5 ya existente que va hacia el periférico de red local inalámbrica.
  • Reduce los costes y facilita la instalación.
  • Transforma la corriente CA entrante en alimentación CC de baja tensión.
  • 1 base y 1 terminal alimentan un periférico de red local inalámbrica.
  • Protege el periférico de red local inalámbrica de posibles subidas de tensión.
  • Funciona con alimentación 5 V CC o 12 V CC (la selección se lleva a cabo por medio de un conmutador DIP).
Guías de instalación rápida
Versión Descripción Fecha Tipo Tamaño de archivo
Descargar 1.02
Quick installation guide (multiple languages)
Show moreShow less
16/10/2012 0:00:00 PDF 3.22mb
Descargas adicionales
Versión Descripción Fecha
Descargar
Certificate of Declaration (multiple documents)
Show moreShow less

Comprar DWL-P200

Comprar en:

Revisiones de hardware
Las descargas varían según la versión de hardware de tu equipo.

Datos de contacto


D-Link Iberia
Muntaner, 239-253, 3ºB
Barcelona 08021

Teléfonos de contacto
Oficina: 93 409 07 70
Soporte técnico: 902 30 45 45

Correo Electrónico
Ventas: es-sales@dlink.com

Marketing:
es-marketing@dlink.com

Prensa:
dlink@prismacomunicacion.com