Cookies
Our website uses cookies. By using the site you agree to our Cookie Policy. Learn more
Ok

Thank you for your feedback.

Sorry we couldn't help! Click here for more FAQs or go to Support.

How do I configure SharePort Web Access on my router?

This FAQ applies to hardware revision B

Step 1: Insert your USB Flash Drive into your router.


Step 2: Open an Internet browser (such as Internet Explorer) and enter http://dlinkrouter.local or http://192.168.0.1 into the address bar.



Step 3: Enter the password for your Admin account in the field provided. If you have not changed this password from the default, leave the field blank. Click Log In.



Step 4: From the network map on the main page, click the USB Device icon to display the storage status. The information displayed here should reflect the characteristics of the USB drive plugged into the USB port.


Step 5: Open a new web browser and enter [IP address of your router]:[HTTP Access Port]

Example (for local access)- http://192.168.0.1:8181


Note: If accessing from the Internet, you need to enter the router’s [WAN IP]:[Port]

Example (for remote access) - http://24.12.134.125:8181 where your router’s WAN side IP address is 23.12.134.125, and the access port is 8181.


Step 6: Enter your router’s Administrator Username and Password.

Note: If you have not changed them from the defaults, the username should be Admin, and the password field should be left blank.

Your media will be organized by media type and will be displayed similar to the image below.

Did you find this useful?
4 people found this useful.
Rank: 1