Cookies
Our website uses cookies. By using the site you agree to our Cookie Policy. Learn more
Ok

FAQ Categories

Thank you for your feedback.

Sorry we couldn't help! Click here for more FAQs or go to Support.

How do I configure the QOS rules on my DIR Series Router?

Step 1: Open a web browser and type the IP address of the D-Link series router into the address bar (default is 192.168.0.1).

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.



Step 3: Click the Advanced tab at the top, then click QoS Engine on the left.

Step 4: Setup the QoS Engine Rules:

  • Enter a Name for your Rule
  • Enter the Priority number (1-255) in the Priority field. (1 being the highest)
  • Enter the computers/device IP address in the Local IP Range
  • Enter the ports you want to prioritze in Local Port Range
  • Leave the Remote IP Range with it’s default settings.
  • Leave the Remote Port Range with it’s default settings.
Step 5: Check mark the box pertaining to the newly entered fields. Step 6: Click on Save Settings. The above rule prioritizes HTTP (port 80) traffic to one computer (192.168.0.100)

 

Did you find this useful?
32 people found this useful.
Rank: 1

These may also help: