WPA can only be configured on the DWL-G730AP in AP (Access Point)mode.

Step 1 Open a web browser and type the IP addressof the DWL-G730AP in the address bar (default is 192.168.0.30).Press Enter.

Step 2 The default username isadmin (all lower case) and the default password isblank (nothing). Click OK.

Step 3 Click the Home tab andthen click Wireless to the left.

Step 4 Next to Authentication selectWPA using the radio buttons.

Step 5 Next to Radius Server 1 IP enterthe IP address of the RADIUS server. Next to Port enterthe port number of the RADIUS server. Next to SharedSecret enter the shared secret key.

Repeat for Radius Server 2 if applicable.

Step 6 Click Apply and then clickContinue to save the new settings.