Support

Product Status - Live

DWS-4026 - CA Revision

Hardware revisions
Downloads can vary across product revisions.

Quick Links

Firmware
Do NOT upgrade firmware on any D-Link product over a wireless connection. Failure of the device may result. Use only hard-wired network connections.
Version Description Date
Download 4.1.0.2

Firmware

Revision Info:    Note: Make sure you upgrade to 4.x code on the Access Point before upgrading to this version.

  • Time zone and daylight saving time support is added for SNTP clients
  • Available flash size – The CLI command show nvram-size displays the NVRAM size information.
06/12/2012
Download 3.0.0.16
  • The switch is unable to save and reload the channel bandwidth information when the mode is configured for 802.11a/n.
  • The VLAN ID and other parameters do not get updated for a wireless client when it roams between a virtual access point with different SSIDs and default VLANs.
  • The Multicast TX Rate is not preserved in the configuration and is lost after a reboot
01/03/2012
Download 3.0.0.14
The master DWS-4026 fails to push AP configuration to the peer switch and the DWL-8600APs managed by peer switch.
DWL-8600APs that are managed by a DWS-4026 become hung suddenly.
22/08/2011
Download 1.0.0.8
Disabled DFS band support for US and JP.
Removed channel 14 for JP.
20/05/2010
Additional Downloads
Version Description Date
Download 1.00
Command Line Interface Guide.
19/04/2010
Datasheets
Description Type File Size
Download
Datasheet
PDF 0.21mb
Manuals
Description Type File Size
Download
Manual
PDF 21.92mb