- Connect
Routers, broadband
Browse Connect Categories:Featured Teasers...Featured Technologies...
- View
Cameras, NVRs
- Share
Network storage
- Entertain
Media players
- Work
SOHO Solutions
Support
Product Status - Live
DSN-5410-10 - CA Revision A
Hardware revisions
Downloads can vary across product revisions.
Quick Links
- Warranty
- Latest Firmware - Version 2.8.0.48
Firmware
Do NOT upgrade firmware on any D-Link product over a wireless connection. Failure of the device may result. Use only hard-wired network connections.
| Version | Description | Date | ||
|---|---|---|---|---|
| Download | 2.8.0.48 | Revision Info
|
02/12/2010 | |
| Download | ||||
| Download | ||||
| Download | 2.8.2.2 | Revision Info
|
16/05/2011 | |
| Download | 2.9.0.11 | Revision Info
|
07/10/2011 | |
| Download | 2.9.1.16 | Revision Info
|
29/11/2011 |
Additional Downloads
| Version | Description | Date | ||
|---|---|---|---|---|
| Download | 1.5 | Revision Info
|
09/06/2011 | |
| Download | 1.4 | Revision Info
|
03/05/2010 | |
| Download | 06.13.12 | Interoperability Matrix for DSN-5410 10 |
13/06/2012 | |
| Download | 07162009 | Revision Info
|
20/04/2010 | |
| Download | 05.05.10 | Revision Info
|
06/05/2010 | |
| Download | 07.30.11 | Revision Info
|
07/10/2011 | |
| Download | 1.3 | Revision Info
|
01/06/2010 | |
| Download | 1.4 | Revision Info
|
16/08/2010 | |
| Download | 30509 | Revision Info
|
01/06/2010 | |
| Download | 06.01.11 | Revision Info
|
09/06/2011 | |
| Download | 1.0 | Revision Info
|
17/05/2010 |
No Documents
FAQ Overview
- After binding a new Controller in my DSN-5000 series array, the write mode went from Write-Back to Write-Through.
- Can I use SAS and SATA Hard Drives at the same time with the DSN-5000 Series?
- Can I use SATA Drives in HA mode with my DSN-5000 Series SAN?
- Can the event log be cleared on my DSN Series SAN?
- Can the SAN auto-start when power is applied?
- After binding a new Controller in my DSN-5000 series array, the write mode went from Write-Back to Write-Through.
- Can I use SAS and SATA Hard Drives at the same time with the DSN-5000 Series?
- Can I use SATA Drives in HA mode with my DSN-5000 Series SAN?
- Can the event log be cleared on my DSN Series SAN?
- Can the SAN auto-start when power is applied?
- Does the MGT port of each Controller in a dual-contoller DSN-5000 series need to be in the Same network?
- Does the use of multiple DSN-5000-10 expansion arrays slow down the performance of the primary DSN-5110-10, DSN-5210-10 or DSN-5410-10 xStack SAN arrays?
- How do I assign an IP address to the data ports of my DSN Series SAN?
- How do I change the login password to my DSN series SAN through the Web interface?
- How do I change the Management IP address of my DSN Series SAN?
- How do I connect iSCSI Initiators to targets on tmy DSN Series SAN?
- How do I create a Volume on my DSN Series SAN?
- How do I reset the admin password of my SAN?
- How do I upgrade the secondary controller´s firmware?
- How do you identify the Primary and secondary controller on the DSN-5000 Series Chassis?
- How do you rebind a new controller on a DSN-5000 series iSCSI controller after a failover?
- How does the DSN-5000 monitor its HA-Heartbeat?
- How many DSN-5000-10 expansion arrays will a primary DSN-5110-10, DSN-5210-10 or DSN-5410-10 xStack SAN array support?
- I just upgraded my xStack Storage firmware. Why is the progress bar displaying the previous firmware version?
- I´ve created a parity volume on my DSN Series SAN. Why is it slow during testing?
- If the xStack Storage unit´s controller fails, is all the data on the RAID volumes lost?
- Is there anything I can do to help allow data recovery in case of losing my logical volumes (with data on the hard disk(s) still intact)?
- What are the ports to forward to get remote access to my SAN?
- What cable type is needed to connect a JBOD expansion array to another JBOD expansion array?
- What cable type is needed to connect a primary array controller to a JBOD expansion array´s I/O board?
- What can I do if the admin account was deleted or account password was lost on my DSN Series SAN?
- What do I do if I have a hard drive failure while using my DSN SAN array?
- What is the default Username and Password for the xStack Storage unit Login?
- What type of console cable must I use to access my SAN?
- When creating a volume (manual mode), why are there no disks displayed in the Select Disk window?
- When I try to upgrade my xStack Storage firmware, it fails. Why?
- When is my xStack Storage loaded and ready to use?
- Why can I only attach a single server to my SAN array?
- Why can´t the server attached to the xStack Storage unit recognize larger volumes?
- Why Should I not connect to the Same iSCSI target with multiple initiators?
Technical Specifications
DSN-5410-10
Features
Drive Bays
Drive Interface Support
System Memory
Cache Memory
Battery Backup for Cache
Bandwidth
Storage Capacity
Operating Systems Supported
Supported NICs, iSCSI Accelerators and iSCSI HBAs
iSCSI Network Interface
Host Interface
Connections
CHAP Authentication
Access Control of Management
iSCSI/TCP/IP Full HW Offload
Jumbo Frames Support
LAG Support (Link Aggregation)
VLAN Support
Volume & RAID Support
RAID Controller
RAID Support
Volumes
Target Nodes
Online Capacity Expansion
Hot Swappable Drives
Instant Volume Access
Free Space Defragmentation
Auto-Detection Failed Drive
Auto-Rebuild Spare Drive
RAID Level Migration
Drive Roaming in Power Off
(configured drives are not bay-specific)
Micro Rebuilds
Storage Management
Embedded IP-Based Management GUI
Firmware Field Upgradeable
SMI-S Version 1.1
Power
Supply Type
Input Voltage
Input Frequency
Input Current
Power Factor Correction
Environmental
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Physical (approximate)
Form Factor
Dimensions (W x D x H)
Weight
International Approvals
Emissions
Safety
RoHS
Warranty and Support
Warranty
Extended Warranty
Support
Ordering Information
DSN-5410-10
DSN-540
DSN-5000-10
DSN-500
DEM-421XT
DSN-210-SW
DSN-5410-10-LW
DSN-540-LW
DSN-5000-10-LW
DSN-500-LW
* SATA Drive support for single controller configuration only.
All references to speed are for comparison purposes only. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted. See inside package for warranty details.
DSN-5410-10
- One 10GbE (XFP Copper or Fiber transceiver sold separately)
Features
Drive Bays
- 12, Expandable to 84 drives total with DSN-5000-10 Expansion Arrays
Drive Interface Support
- SAS/SATA*
System Memory
- 512MB Standard
Cache Memory
- 2GB Standard
Battery Backup for Cache
- Standard (Approximately 72 hours on full charge)
Bandwidth
- Up to 1,160MB/s
Storage Capacity
- 24TB Capacity with 2TB Hard Drives
- Additional DSN-5000-10 Expansion Arrays Provide 168TB Total Capacity
Operating Systems Supported
- Windows Vista 32-bit & x64 (Ultimate & Enterprise) w/Built-in iSCSI initiator
- Windows Server 2003 R2 | SP1 32 & 64-bit (Standard & Enterprise) with v2.07 iSCSI initiator or later
- Windows Server 2008 Enterprise 32 & 64-bit with Built-in iSCSI initiator
- Windows XP Pro 32 & 64-bit with v2.07 iSCSI initiator or later
- Windows 2000 Advanced Server No MS iSCSI Initiator support, Qlogic HBA only
- Red Hat 7.3
- Red Hat Enterprise AS update 5 (64-bit)
- Red Hat Enterprise 5 update 2 (64-bit)
- SuSE Enterprise Server 10.2 32-bit
- Sun Solaris 10 build 6/06
- IBM AIX 5L
- Microsoft Hyper-V
- VMWare ESX Server 3.02 & 3.5
- VMWare ESX Server 4.0
- Virtual Iron v4.2
- Citrix XenServer v4
- Mac OS X (10.4 & 10.5)
Supported NICs, iSCSI Accelerators and iSCSI HBAs
- Intel Pro 1000MT & XT [1GbE]
- Intel Pro 10000 CX4 [10GbE]
- Myricom 10G-PCIE-8A-C+E [10GbE]
- Chelsio S310X-SR-XFP [10GbE]
- Neterion Xframe II & Xframe E [10GbE]
- Alacritech SES2104ET (Drivers: SNP 9.1.0.1092 & 7.3.1.0)
- Alacritech SES2102ET (Drivers: SNP 9.1.0.1092 & 7.3.1.0)
- QLogic 4010C, 4052C, & 4062C
iSCSI Network Interface
Host Interface
- iSCSI Draft 2.0 Compliant Initiator
Connections
- 1,024 Hosts
CHAP Authentication
- Yes
Access Control of Management
- Yes
iSCSI/TCP/IP Full HW Offload
- Yes
Jumbo Frames Support
- Yes
LAG Support (Link Aggregation)
- Not Applicable
VLAN Support
- Up to Eight 1-to-1 Mapping between IP Subnet and VLAN. Multiple VLANs per physical port with VLAN Tag (IEEE 802.1Q Tag)
Volume & RAID Support
RAID Controller
- Single- Integrated in ASIC (one per controller)
RAID Support
- RAID Levels 0, 1, 1+0 and 5 (Striped sets, mirrored sets, striped mirrored sets and parity sets)
Volumes
- 1,024 Virtual Volumes (256 accessible per initiator)
Target Nodes
- 1,024
Online Capacity Expansion
- Yes
Hot Swappable Drives
- Yes
Instant Volume Access
- Yes
Free Space Defragmentation
- Yes
Auto-Detection Failed Drive
- Yes
Auto-Rebuild Spare Drive
- Yes
RAID Level Migration
- Yes
Drive Roaming in Power Off
(configured drives are not bay-specific)
- Yes
Micro Rebuilds
- Yes
Storage Management
Embedded IP-Based Management GUI
- Create, manage, expand and monitor storage pool, volumes and RAID
- Event manager to view and persist events
Firmware Field Upgradeable
- Yes
SMI-S Version 1.1
- Yes
Power
Supply Type
- Dual Redundant Hot-Swappable 430 Watt
Input Voltage
- 85-264 VAC (auto-switching)
Input Frequency
- 50-63 Hz
Input Current
- 2A Maximum at 115VAC
Power Factor Correction
- Per EN61000-3-2
Environmental
Operating Temperature
- 41 to 104F (5 to 40C)
Storage Temperature
- -4 to 158F (-20 to 70C)
Operating Humidity
- 10% ~ 80% (Non-condensing)
Storage Humidity
- 5% ~ 95% (Non-condensing)
Physical (approximate)
Form Factor
- 2U Industry-standard 19-inch Rack
Dimensions (W x D x H)
- 17.6in x 19.5in x 3.5in (44.7cm x 49.5cm x 8.9cm)
Weight
- 50 lbs (22 kg)
International Approvals
Emissions
- CE Mark, FCC Class A, EN55022 Class A, EN55024
Safety
- UL/CUL, CSA International
RoHS
- Compliant
Warranty and Support
Warranty
- 3-Year Limited (Manufacturers warranty on Hard Drives)
Extended Warranty
- Available (see Ordering Information below)
Support
- 1 year 9 hours per day / 5 days per week Technical Support
Ordering Information
DSN-5410-10
- xStack Storage 1x10GbE iSCSI SAN Array, 12 Bays, 2U, w/ Primary Controller, w/o Drives, with Trays
DSN-540
- xStack Storage 1x10GbE Secondary iSCSI SAN Controller for DSN-5410-10
DSN-5000-10
- xStack Storage iSCSI SAN Expansion Array, 12 Bays, 2U, w/ Primary I/O Board, w/o Drives, with Trays
DSN-500
- xStack Storage Secondary I/O Board for DSN-5000-10
DEM-421XT
- 10Gigabit XFP Adapter (DSN-5410-10 and DSN-540)
DSN-210-SW
- SureSync Replication & Synchronization Software
DSN-5410-10-LW
- Extended Warranty for DSN-5410-10
DSN-540-LW
- Extended Warranty for DSN-540
DSN-5000-10-LW
- Extended Warranty for DSN-5000-10
DSN-500-LW
- Extended Warranty for DSN-500
* SATA Drive support for single controller configuration only.
All references to speed are for comparison purposes only. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted. See inside package for warranty details.
Quick Links
Quickly access parts of the D-Link site.
Copyright © 2012 D-Link Corporation/D-Link Systems, Inc.
