Support

Product Status - Live

DSN-5110-10 - CA Revision A

Hardware revisions
Downloads can vary across product revisions.

Quick Links

Firmware
Do NOT upgrade firmware on any D-Link product over a wireless connection. Failure of the device may result. Use only hard-wired network connections.
Version Description Date
Download 2.8.0.48

Revision Info


  • Automatic REBIND after Controller Failover (DSN-5000 systems only)  Automatic “Down Drive” when a SMART Threshold is Exceeded
  •   Performance Improvements
02/12/2010
Download
Download 2.8.2.2

Revision Info

  • ¤ MIP8P bug check error fixed
  • ¤ Network Settings view fixed
16/05/2011
Download 2.9.0.11

Revision Info


  • No email sent when battery failed - error fixed.
  •  RAID-10 stripe width larger than 8 - error fixed.
29/11/2011
Download 2.9.1.16

Revision Info


  • DSN-5XXX controllers with different MAC-ID ranges can be used together.  Misc. error message situations fixed.
29/11/2011
Additional Downloads
Version Description Date
Download 1.5

Revision Info

  • CLI Users Guide.
09/06/2011
Download 1.4

Revision Info


  • Hardware Reference Guide.
03/05/2010
Download 06.13.12
Interoperability Matrix for DSN-5110 10
13/06/2012
Download 07162009

Revision Info

  • Initial release.
20/04/2010
Download 05.05.10

Revision Info


  • Quick Start Guide for Primary Array.
06/05/2010
Download 07.30.11

Revision Info

  • Solid State Drive Performance Document.
07/10/2011
Download 1.4

Revision Info

  • Software User's Guide.
16/08/2010
Download 30509

Revision Info

  • LAG Configuration Technical Bulletin.
01/06/2010
Download 06.01.11

Revision Info

  • Troubleshooting Information and Tips document.
09/06/2011
Download 1.0

Revision Info

  • xStack Storage iSCSI SAN Visio Icons.
17/05/2010

Technical Specifications

DSN-5110-10
  • Four 1GbE Copper per controller

Features

Drive Bays
  • 12, Expanadable with DSN-5000-10 Expansion Arrays to
  • 48 for the DSN-5110-10
Drive Interface Support
  • SAS/SATA1

System Memory
  • 512MB

Cache Memory
  • 1GB per controller

Battery Backup for Cache
  • Standard (Approximately 72 hours on full charge)

Bandwidth
  • Up to 425MB/s

Operating Systems Supported
  • Windows Vista® 32-bit & x64 (Ultimate & Enterprise) w/Built-in iSCSI initiator
  • Windows Server® 2003 R2 | SP1 32 & 64-bit (Standard & Enterprise) with v2.07 iSCSI initiator or later
  • Windows Server 2008 Enterprise 32 & 64-bit with Built-in iSCSI initiator
  • Windows XP Pro® 32 & 64-bit with v2.07 iSCSI initiator or later
  • Windows 2000 Advanced Server – No MS iSCSI Initiator support,  Qlogic HBA only
  • Red Hat® 7.3
  • Red Hat Enterprise AS update 5 (64-bit)
  • Red Hat Enterprise 5 update 2 (64-bit)
  • SuSE® Professional 9.3 32-bit
  • SuSE Enterprise Server 10.2 32-bit
  • Sun Solaris® 10 build 6/06
  • IBM AIX 5L
  • Microsoft Hyper-V
  • VMWare ESX Server® 3.02 & 3.5
  • VMWare ESX Server 4.0
  • Virtual Iron v4.2
  • Citrix XenServer® v4
  • Mac OS X® (10.4 & 10.5)

Supported NICs, iSCSI Accelerators and iSCSI HBAs
  • Intel® Pro 1000MT & XT [1GbE]
  • Intel Pro 10000 CX4 [10GbE]
  • Myricom® 10G-PCIE-8A-C+E [10GbE]
  • Chelsio S310X-SR-XFP [10GbE]
  • Neterion® Xframe® II & Xframe E [10GbE]
  • Alacritech® SES2104ET (Drivers: SNP 9.1.0.1092 & 7.3.1.0)
  • Alacritech SES2102ET (Drivers: SNP 9.1.0.1092 & 7.3.1.0)
  • QLogic® 4010C, 4052C, & 4062C

iSCSI Network Interface

Host Interface
  • iSCSI Draft 20 Compliant Initiator

Connections
  • 1,024 Hosts

CHAP Authentication
  • Yes

Access Control of Management
  • Yes

iSCSI/TCP/IP Full HW Offload
  • Yes

Jumbo Frames Support
  • Yes

LAG Support (Link Aggregation)
  • Up to Four LAGs (Static LAG)

VLAN Support
  • Up to Eight 1-to-1 Mapping between IP Subnet and VLAN. Multiple VLANs per physical port with VLAN Tag
  • All physical ports in LAG belong to same VLAN (IEEE 802.1Q Tag)

Flow Control
  • Enabled by default

Volume & RAID Support

RAID Controller
  • Intergrated in ASIC Chip (one per controller)

RAID Support
  • RAID Levels 0, 1, 1+0 and 5 (Striped sets, mirrored sets, striped mirrored sets and parity sets)

Volumes
  • 1,024 Virtual Volumes (256 accessible per initiator)

Target Nodes
  • 1,024

Online Capacity Expansion
  • Yes

Hot Swappable Drives
  • Yes

Instant Volume Access
  • Yes

Free Space Defragmentation
  • Yes

Auto-Detection Failed Drive
  • Yes

Auto-Rebuild Spare Drive
  • Yes

RAID Level Migration
  • Yes

Drive Roaming in Power Off (configured drives are not bay-specific)
  • Yes

Micro Rebuilds
  • Yes

Storage Management

Embedded IP-Based Management GUI
  • Create, manage, expand and monitor storage pool, volumes and RAID
  • Event manager to view and persist events

Firmware Field Upgradeable
  • Yes

SMI-S Version 1.1
  • Yes

Event Log
  • Yes

Power

Supply Type
  • Dual Redundant Hot Swappable 2U 430 Watt

Input Voltage
  • 85-264 VAC (auto-switching)

Input Frequency
  • 50-63 Hz

Input Current
  • 2A Maximum at 115VAC

Power Factor Correction
  • Per EN61000-3-2

Environmental

Operating Temperature
  • 41° to 104°F (5° to 40°C)

Storage Temperature
  • -4° to 158°F (-20° to 70°C)

Operating Humidity
  • 10% ~ 80% (Non-condensing)

Storage Humidity
  • 5% ~ 95% (Non-condensing)

Physical (approximate)

Form Factor
  • 2U Industry-standard 19-inch Rack

Dimensions (W x D x H)
  • 17.6in x 19.5in x 3.5in (44.7cm x 49.5cm x 8.9cm)

Weight
  • 50 lbs (22 kg)

International Approvals

Emissions
  • CE Mark, FCC Class A, EN55022 Class A, EN55024

Safety
  • UL/CUL, CSA International

RoHS
  • Compliant

Warranty and Support

Warranty
  • 3-Year Limited (Manufacturer’s warranty on Hard Drives)

Extended Warranty
  • Available (see Ordering Information below)

Support
  • 1-Year (9 hours per day / 5 days per week Technical Support)

Ordering Information

Part Number Description

DSN-5110-10
  • xStack Storage® 4x1GbE iSCSI SAN Array, 12 Bays, 2U, w/ Primary Controller, w/o Drives, with Trays

DSN-510
  • xStack Storage® 4x1GbE Secondary iSCSI SAN Controller for DSN-5110-10

DSN-5000-10
  • xStack Storage® iSCSI SAN Expansion Array, 12 Bays, 2U, w/ Primary I/O Board, w/o Drives, with Trays

DSN-500
  • xStack Storage® Secondary I/O Board for DSN-5000-10

DSN-210-SW
  • SureSync Replication & Synchronization Software

DSN-5110-10-LW
  • Extended Warranty for DSN-5110-10

DSN-510-LW
  • Extended Warranty for DSN-510

DSN-5000-10-LW
  • Extended Warranty for DSN-5000-10

DSN-500-LW
  • Extended Warranty for DSN-500

1 SATA Drive support for single controller configuration only.

All references to speed are for comparison purposes only. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted. See inside package for warranty details