- Connect
Routers, broadband
Browse Connect Categories:Featured Teasers...Featured Technologies...
- View
Cameras, NVRs
- Share
Network storage
- Entertain
Media players
- Work
SOHO Solutions
Support
Product Status - Live
DSN-3200-10 - CA Revision A
Hardware revisions
Downloads can vary across product revisions.
Quick Links
- Warranty
- Latest Firmware - Version 2.9.1.16
- Manual
Firmware
Do NOT upgrade firmware on any D-Link product over a wireless connection. Failure of the device may result. Use only hard-wired network connections.
| Version | Description | Date | ||
|---|---|---|---|---|
| Download | 2.9.1.16 | Revision Info
|
29/11/2011 | |
| Download | 2.9.0.11 | Revision Info
|
07/10/2011 | |
| Download | 2.8.2.2 | Revision Info
|
16/05/2011 | |
| Download | 2.8.0.48 | Revision Info
|
02/12/2010 | |
| Download | 1.6.1.23 | Revision Info
|
29/05/2008 | |
| Download | 1.5.1 | Revision Info
The V1.5.1 release has been identified as a mandatory release and should be implemented as soon as possible. Please upgrade to V1.4.1 first immediately followed by upgrading to V1.5.1.
|
||
| Download | 1.4.1 | Revision Info
The V1.4.1 release must be installed as the first step in upgrading to the V1.5.1
|
13/11/2007 | |
| Download | 1.4.0.27 | Revision Info
|
02/03/2007 | |
| Download | 1.3.0.24 | Revision Info
|
21/12/2006 |
Additional Downloads
| Version | Description | Date | ||
|---|---|---|---|---|
| Download | 1.5 | Revision Info
|
09/06/2011 | |
| Download | 1.00 | Revision Info
|
11/09/2008 | |
| Download | 1.00 | Revision Info
|
06/01/2009 | |
| Download | 07162009 | Revision Info
|
20/04/2010 | |
| Download | 12.11.08 | Revision Info
|
15/12/2008 | |
| Download | 01.08.10 | Revision Info
|
06/05/2010 | |
| Download | 07.30.11 | Revision Info
|
07/10/2011 | |
| Download | 1.40 | Revision Info
|
09/06/2011 | |
| Download | 30509 | Revision Info
|
01/06/2010 | |
| Download | 06.01.11 | Revision Info
|
09/06/2011 | |
| Download | 2.00 | Revision Info
|
11/09/2008 | |
| Download | 12.02.09 | Revision Info
|
03/12/2009 | |
| Download | 1.0 | Revision Info
|
17/05/2010 | |
| Download | 06.13.12 | Interoperability Matrix for DSN-3200 10 |
13/06/2012 |
FAQ Overview
- Can the event log be cleared on my DSN Series SAN?
- Can the SAN auto-start when power is applied?
- How do I assign an IP address to the data ports of my DSN Series SAN?
- How do I change the login password to my DSN series SAN through the Web interface?
- How do I change the Management IP address of my DSN Series SAN?
- Can the event log be cleared on my DSN Series SAN?
- Can the SAN auto-start when power is applied?
- How do I assign an IP address to the data ports of my DSN Series SAN?
- How do I change the login password to my DSN series SAN through the Web interface?
- How do I change the Management IP address of my DSN Series SAN?
- How do I connect iSCSI Initiators to targets on tmy DSN Series SAN?
- How do I create a Volume on my DSN Series SAN?
- How do I reset my DSN Series SAN to Factory Defaults?
- How do I reset the admin password of my SAN?
- I just upgraded my xStack Storage firmware. Why is the progress bar displaying the previous firmware version?
- I´ve created a parity volume on my DSN Series SAN. Why is it slow during testing?
- If the xStack Storage unit´s controller fails, is all the data on the RAID volumes lost?
- Is there anything I can do to help allow data recovery in case of losing my logical volumes (with data on the hard disk(s) still intact)?
- What actions occur when powering-on a DSN-3000 Series SAN?
- What are the ports to forward to get remote access to my SAN?
- What can I do if the admin account was deleted or account password was lost on my DSN Series SAN?
- What do I do if I have a hard drive failure while using my DSN SAN array?
- What is an Extent and what information can I view using the Extent tab on DSN-3200?
- What is Spare Count and how does it work on the DSN-3200 Series San?
- What is the default number of LAGS for DSN-3200/3400 series?
- What is the default Username and Password for the xStack Storage unit Login?
- What type of console cable must I use to access my SAN?
- When creating a volume (manual mode), why are there no disks displayed in the Select Disk window?
- When I try to upgrade my xStack Storage firmware, it fails. Why?
- When is my xStack Storage loaded and ready to use?
- Why am I unable to delete a volume on a target node?
- Why can I only attach a single server to my SAN array?
- Why can´t the server attached to the xStack Storage unit recognize larger volumes?
- Why Should I not connect to the Same iSCSI target with multiple initiators?
Technical Specifications
DSN-3200-10
Features
Drive Bays
Drive Interface Support
System Memory
Cache Memory
Battery Backup for Cache
Storage Capacity
Operating Systems Supported
Supported NICs, iSCSI Accelerators and iSCSI HBAs
iSCSI Network Interface
Host Interface
Connections
CHAP Authentication
Access Control of Management
iSCSI/TCP/IP Full HW Offload
Jumbo Frames Support
LAG Support (Link Aggregation)
VLAN Support
Flow Control
Volume & RAID Support
RAID Controller
RAID Support
Volumes
Target Nodes
Online Capacity Expansion
Hot Swappable Drives
Instant Volume Access
Free Space Defragmentation
Auto-Detection Failed Drive
Auto-Rebuild Spare Drive
RAID Level Migration
Drive Roaming in Power Off (configured drives are not bay-specific)
Micro Rebuilds
Storage Management
Embedded IP-Based Management GUI
Firmware Field Upgradeable
SMI-S Version 1.1
Power
Supply Type
Input Voltage
Input Frequency
Input Current
Power Factor Correction
Power Consumption
Thermal
Environmental
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Physical (approximate)
Form Factor
Dimensions (W x D x H)
Weight
International Approvals
Emissions
Safety
Warranty and Support
Warranty
Extended Warranty
Support
Ordering Information
DSN-3200-10
DSN-3200-10
- Eight 1GbE Copper
- Up to 850MB/s
Features
Drive Bays
- 15
Drive Interface Support
- SATA-II support
System Memory
- 512MB standard
Cache Memory
- 512MB standard
Battery Backup for Cache
- Standard (approximately 72 hours on full charge)
Storage Capacity
- 30TB Capacity with 2TB Hard Drives
Operating Systems Supported
- Windows Vista® 32-bit & x64 (Ultimate & Enterprise) w/Built-in iSCSI initiator
- Windows Server® 2003 R2 | SP1 32 & 64-bit (Standard & Enterprise) with v2.07 iSCSI initiator or later
- Windows Server 2008 Enterprise 32 & 64-bit with Built-in iSCSI initiator
- Windows XP Pro® 32 & 64-bit with v2.07 iSCSI initiator or later
- Windows 2000 Advanced Server – No MS iSCSI Initiator support, Qlogic HBA only
- Red Hat® 7.3
- Red Hat Enterprise AS update 5 (64-bit)
- Red Hat Enterprise 5 update 2 (64-bit)
- SuSE® Professional 9.3 32-bit
- SuSE Enterprise Server 10.2 32-bit
- Sun Solaris® 10 build 6/06
- IBM AIX 5L
- Microsoft Hyper-V
- VMWare ESX Server® 3.02 & 3.5
- VMWare ESX Server 4.0
- Virtual Iron v4.2
- Citrix XenServer® v4
- Mac OS X® (10.4 & 10.5)
Supported NICs, iSCSI Accelerators and iSCSI HBAs
- Intel® Pro 1000MT & XT [1GbE]
- Intel Pro 10000 CX4 [10GbE]
- Myricom 10G-PCIE-8A-C+E [10GbE]
- Chelsio® S310X-SR-XFP [10GbE]
- Neterion® Xframe® II & Xframe E [10GbE]
- Alacritech® SES2104ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)
- Alacritech SES2102ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)
- QLogic® 4010C, 4052C, & 4062C
iSCSI Network Interface
Host Interface
- iSCSI Draft 20 compliant initiator
Connections
- 1,024 hosts
CHAP Authentication
- Yes
Access Control of Management
- Yes
iSCSI/TCP/IP Full HW Offload
- Yes
Jumbo Frames Support
- Yes
LAG Support (Link Aggregation)
- Up to eight LAGs with DSN-3200-10 (Static LAG)
VLAN Support
- Up to eight 1-to-1 mapping between IP subnet and VLAN. Multiple VLANs per physical port with VLAN tag. All physical ports in LAG belong to same VLAN (IEEE802.1Q Tag) (DSN-3200-10)
Flow Control
- Enabled by default
Volume & RAID Support
RAID Controller
- Single- Integrated in ASIC
RAID Support
- RAID Levels 0, 1, 1+0 and 5 (Striped sets, mirrored sets, striped mirrored sets and parity sets)
Volumes
- 1,024 Virtual Volumes (256 accessible per initiator)
Target Nodes
- 1,024
Online Capacity Expansion
- Yes
Hot Swappable Drives
- Yes
Instant Volume Access
- Yes
Free Space Defragmentation
- Yes
Auto-Detection Failed Drive
- Yes
Auto-Rebuild Spare Drive
- Yes
RAID Level Migration
- Yes
Drive Roaming in Power Off (configured drives are not bay-specific)
- Yes
Micro Rebuilds
- Yes
Storage Management
Embedded IP-Based Management GUI
- Create, manage, expand and monitor storage pool, volumes and RAID.
- Event manager to view and persist events.
Firmware Field Upgradeable
- Yes
SMI-S Version 1.1
- Yes
Power
Supply Type
- Triple Redundant 3U 760 Watt
Input Voltage
- 90-264 VAC (auto-switching)
Input Frequency
- 47-63 Hz
Input Current
- 20A Maximum at 90VAC and 10A Maximum at 264VAC (maximum amps vs. voltage varies linearly throughout this voltage range)
Power Factor Correction
- 95%@110V, Full load
Power Consumption
- 570W (full configuration)
Thermal
- 2000 BTU / hour (full configuration)
Environmental
Operating Temperature
- 32° to 104°F (0° to 40°C)
Storage Temperature
- -4° to 158°F (-20° to 70°C)
Operating Humidity
- 20% ~ 90% (Non-condensing)
Storage Humidity
- 10% ~ 95% (Non-condensing)
Physical (approximate)
Form Factor
- 3U industry-standard 19-inch rack
Dimensions (W x D x H)
- 17.2in x 22.5in x 5.2in (438mm x 571mm x 133mm)
Weight
- 72.8 pounds / 33 kilograms (full configuration)
International Approvals
Emissions
- CE Class A, FCC Class A, C-Tick Class A, VCCI Class A
Safety
- CSA 60950-1, UL60950-1, IEC 60950-1, EN 60950-1
Warranty and Support
Warranty
- 3 year limited1 (Manufacturers warranty on Hard Drives)
Extended Warranty
- Available
Support
- 1 year (9 hours per day / 5 days per week Technical Support)
Ordering Information
DSN-3200-10
- xStack Storage® 8x1GbE iSCSI SAN Array, 15 Bays, 3U, w/o Drives, with Trays
Quick Links
Quickly access parts of the D-Link site.
Copyright © 2012 D-Link Corporation/D-Link Systems, Inc.
