Revision Info:
- Fix: In AP+MultiSSID, WDS, or WDS with AP modes, if the remote side’s MAC address starts with “1C”, AP will hang. Need to push the hardware reset button for factory reset.
- Fix: Connection issue when AP set as WPA-PSK-AUTO, client DWA160 Rev A2 set as WPA-PSK+TKIP.
- Fix: When Limit Admin Enabled, it will drop the EAP packets (4-way-handshake fail).
Release Notes:
Firmware: 1.02
Date: 04/19/10
1. Fix: In AP+MultiSSID, WDS, or WDS with AP modes, if the remote side’s MAC address starts with “1C”, AP will hang. Need to push the hardware reset button for factory reset.
2. Fix: Connection issue when AP set as WPA-PSK-AUTO, client DWA160 Rev A2 set as WPA-PSK+TKIP.
3. Fix: When Limit Admin Enabled, it will drop the EAP packets (4-way-handshake fail).
4. Fix: When CONFIG_DHCP_SERVER_ENABLE set 1 that would cause kernel panic when RADIUS server send certificate packet.
5. Fix: When primary SSID set as WPA-PSK, will cause other multiple SSID’s clients associated with primary in 11g mode, not 11n mode.