Support

Revision Info

• Add PCI error, beacon stuck, cold/warm start into syslog.
• Reboot when meet PCI error problem.
• Firewall on TCP/IP stack of AP itself.
• Multicast packet control.
• Upload/download ACL file.
• Hide the password when login from CLI.

Revision Info

• Support new MAC adderss, prefixed with 1C/5C/90. WDS can scan but WDS connection fail with MAC prefixed with 1C.
• MAC clone function cannot enter (1C) MAC.
• [MSSID+Internal Radius] station can't connect MSSID by Internal RADIUS server, if Primary SSID not enable internal Radius auth.
• [CMD][Schedule] can't set MSSID index from CLI.

Release Notes:

Firmware: 1.13
Date: 05/11/2010

Problems Resolved:
1. Support new MAC adderss, prefixed with 1C/5C/90. WDS can scan but WDS connection fail with MAC prefixed with 1C.
2. MAC clone function cannot enter (1C) MAC.
3. [MSSID+Internal Radius] station can´t connect MSSID by Internal RADIUS server, if Primary SSID not enable internal Radius auth.
4. [CMD][Schedule] can´t set MSSID index from CLI.
5. [Mssid] when setting security as open and wep for multi-ssid, key index could not set correctly.
6. [NTP+Schedule] When enable Schedule after NTP, could not work well.
7. [MSSID] switch RADIUS from External to Internal, the RADIUS server setting will disappear.
8. [WDS +Link LED] Sometime the LInk LED displays error.
9. [EG] No Beacons are issued and can´t transmit any packet at 5G band.
10. [WAP] AP will crash at wpa-personal.
11. [APC+Endurance+HT40+No encryption] Endurance fail after 2 hours. APC ping Root AP fail.
12. [run chariot+reboot root ap+ APC ping Root AP fail].
13. [console] ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36).
14. [APC connected+Intrusion] The scanned AP´s status is forever up and Last Seen´s column become blank.
15. [WDS - Multi WDS MAC Table] Add more then One WDS MAC address to WDS table, the WDS AP connection will fail.
16. [APC+Limit administrator vid] When Wireless client mode is set, Limit Administrator vid function should be grayed.
17. [FW] MSSID connect fail.
18. [FW] EAP+DHCPC(ap side) work fail.
19. [FW]fix INTEL 5300 compatibility issue.
20. [WEB]a description issue for WDSInfo in HELP.(ex. WO power saving mode).
21. [FW]APC can not sense it´s root is gone, when APC is scaning and power off root AP.
22. [FW] Beacon loss HT element(EID is 45,61) when Cipher = Auto.

Flow Number ID Subject
BTD2009041256

3


[WDS +Scan] Sometimes the AP scans more then one WDS MAC.
BTD2009041340

7


[APC+Root AP´s channel is changed] Change Root AP´s channel and APC can´t connect it again.
BTD2009041380

9


[SNMP] Enable SNMP trap, but trap server don´t receive any snmp trap.
BTD2009041967

14


[MIB] version number error.
BTD2009041971

15


Incorrect Wireless Mode] Beacon loss HT EID(45,61) when Cipher = Auto.
BTD2009042025

16


[AP Array] Device information error.
BTD2009042087

18


[Help Files] add some description about 802.1X.
BTD2009042093

19


[APC not connected + Intrusion] Intrusion can´t work when APC isn´t connected.
BTD2009042108

22


[Channel list of TW] no ch165.
BTD2009042110

23


[WDS compatibility issue with DAP-1353] Set WDS mode +WPA2-PSK-AES , it can not connect to DAP-1353 WDS AP. (FW 2.10rc007).
BTD2009042114

24


[WDS+Log] Can not display WDS log.
BTD2009042139

26


[MSSID TX Power is incorrect] One condition cause that MSSID Tx power become incorrect.
BTD2009042173

27


[CLI message] Ping Control message in Web not match in console.
BTD2009042183

28


[APC power+JP country] APC tx power is 31 dBm in JP country.
BTD2009042295

32


[JP][APC can´t connect Root AP with SSID hidden in 2.4G] APC for JP doesn´t send probe packet in 2.4G band.
1. [CLI -runtime] When get runtime, please add revsion.
2. [WDS+Scan] Sometime WDS do scan, it will cause scan page hanging.
3. [WDS +Scan] Sometime the AP scan more then one WDS MAC.
4. [Hidden page+WLAN Driver] WLAN Driver has null value.
5. [AP+WPA2-PSK-AES +BT] Run BT about 12h , the AP cause kernel Panic and it will auto reboot.
8. [APC connected+Always scan channel 1 AP] When APC is connected, it almost only scan channel 1 AP for 2.4G].
9. [Txpower] Wrong txpower level.
10. [Wireless Intrusion] When Target 11n AP with WPA2-Personal/Enterprise will show "G" in the Band of Field.

Enhancements:
1. Base on "D-Link WiFI Frequency table_20090429.xls".
a) Support country RU,BR,EG.
modify txpower and channel range for all country in this excel table.


Firmware: 1.10
Date: 06/23/2009

1. Add New Feature
- AP Array
- WLAN Schedule per SSID
- WLAN partition per SSID
- 802.1p
- 802.1x


Firmware: 1.00
Date: 09/09/2008

1. Shipping version. 

Revision Info

• Add New Features: AP Array
• WLAN Schedule per SSID
• WLAN partition per SSID
• 802.1p
• 802.1x

Revision Info

• Shipping version

Revision Info

• AP Manager II platform for business class AP. 
• Used with PostgreSQL.
•   D-Link AP Manager II Database Converter included.
•   ScanAP application included.

Revision Info

• Works with AP Manager II platform 2.10.
• Works with firmware 1.13.

Revision Info

• Works with D-View 5.1 and 6.
• Works with firmware 1.13.

Revision Info

• AP Manager II user manual

Manual

• Win2K, WinXP, Vista 32, Linux, Mac OS