AirPremier N Dual Band Exterior PoE Access Point powered by CloudCommand

The D-Link^® AirPremier^® N Dual Band Exterior PoE Access Point powered by CloudCommand™ (DAP-3525) is the foundation of the next generation of Wi-Fi networks for business. It leverages a pioneering cloud architecture that makes deploying, configuring, securing, and managing Access Points an easy task that can be completed securely from anywhere with Internet access. This Access Point is designed for exterior deployments in support of small and medium businesses to bridge the gap between easy-to-use consumer-grade hardware that scales poorly and prohibitively expensive and complex enterprise-grade solutions that are difficult to manage.

With the AirPremier^® N Dual Band Exterior PoE Access Point powered by CloudCommand™ you can enjoy a secure, business-grade Wi-Fi network that is reliable and easy to use at a fraction of the cost of a traditional enterprise solution.

Easy Setup
The AirPremier^® N Dual Band Exterior PoE Access Point powered by CloudCommand™ is simple to set up (individually or in groups) using a web browser and an Internet connection. There is no need to install software from a CD or to log into product configuration pages. Unlike traditional models, once these access points connect to your local area network (LAN) they automatically retrieve their configuration settings from the Internet and are ready for use in minutes. The only task remaining is their physical installation.

Versatile Access Point
The DAP-3525 allows network administrators to deploy a highly manageable and extremely robust Dual Band business-class wireless network. The DAP-3525 can provide optimal wireless coverage in either 2.4GHz or 5GHz bands (selectable) with maximum wireless signal rates of up to 300Mbps¹.

For advanced installations, this new high-speed Access Point has integrated 802.3af Power over Ethernet (PoE)6 support, allowing installation of this device in areas where power outlets are not readily available.

Administer Anywhere
The DAP-3525 gives users the power to administer the entire Wi-Fi network from anywhere through the cloud portal, even if the APs are distributed across multiple locations. Save time and resources by making changes to all the APs simultaneously. Or, you can adjust their settings individually. Access is as simple as opening a web browser and logging into your online account at dlink.cloudcommand.com. Make security changes, add and remove individual network users, view graphical reports and much more – all from your office or while on the road. You can receive alerts via email or by text message.

Powerful, Complete Coverage
Thanks to CloudCommand technology, these affordable business-grade Access Points can be easily and cost effectively deployed in groups. This allows for a higher density of access options, ensuring more complete coverage, well-balanced bandwidth loads and superior speed. What that delivers to the end user is an overall seamless and high-quality experience.

Secure Access
In addition to the traditional WPA2™ encryption standard for secure access, the DAP-3525 offers Individual Device Authentication (IDA) technology. This technology automatically identifies and secures each connected device on an individual basis. The security setup is as simple as sending a text message. IDA allows for easier management of network access privileges and gives administrators the ability to quickly add and remove users without having to constantly change security keys (a common challenge that any wireless solutions have today). Administrators can also choose to send individual network keys to users by email or text message.

Reduce Cost of Ownership
The DAP-3525 provides everything an administrator needs to remotely manage Wi-Fi networks, reducing the hassle of maintaining costly on-site IT support. By leveraging the Internet, the DAP-3525 has made management of APs through physical controllers an obsolete concept, reducing network infrastructure costs and simplifying both deployment and management. Prepare to save money and resources by implementing a DAP-3525-based Wi-Fi network in your business.

Exterior Installation and Performance
Ideal for exterior deployments, the DAP-3525’s IP65 Rated enclosure is weather resistant and designed to easily install beneath overhangs or in locations with limited protection from elements. With a built-in heater, the DAP-3525 is perfect for exterior installations where extreme weather is an issue. For optimized performance, the DAP-3525 includes a powerful omni-directional antenna embedded in the front panel specifically designed to enhance point-to-point deployments, making superior outdoor connectivity possible. Optionally, two N-type antenna connectors are available if an alternative radiation pattern is required for the deployment.


<sup>1 Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, buildings materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. Wireless range and speed rates are D-Link RELATIVE performance measurements based on the wireless range and speed rates of a standard Wireless G product from D-Link. Maximum throughput based on D-Link Wireless N devices.

All references to speed and range are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.</sup>

 

 

Standards

• IEEE 802.11n
• IEEE 802.11a
• IEEE 802.11g
• IEEE 802.11b
• IEEE 802.3af
• IEEE 802.3u
• IEEE 802.3x
• IEEE 802.3

Network Management

• Command Line Interface
  • Telnet
  • Secure (SSH) Telnet
• Web Browser Interface
  • HTTP
  • Secure HTTP (HTTPS)
• CloudCommand™

Security

• WPA2™ – Personal
• WPA2™ – Personal with IDA (Individual Device Authorization)
• WPA2 – Enterprise
• SSID Broadcast Disable
• MAC Address Access Control

Wireless Frequency Range¹

• 2.4GHz (2.4GHz to 2.4835GHz)
• 5GHz (5.15GHz to 5.25GHz and 5.725GHz to 5.85GHz)

Operating Modes

• Access Point (AP)

CloudCommand™ Management

• Remote Configuration
• Remote Upgrade
• Station Status
• System Status
• AP Statistic
• Active Alerting System
• Multi-location Support
• Graphic Reports

Embedded Directional Antenna Peak Gain

• 8dBi @ 2.4 GHz
• 10dBi @ 5 GHz

Maximum Transmit Output Power²

• 17dBm @ 2.4 GHz
• 16dBm @ 5 GHz

Maximum Effective Isotropic Radiated Power (EIRP)

• 28dBm @ 2.4 GHz
• 29dBm @ 5 GHz

LEDs

• Power
• WLAN
• LAN

Maximum Power Consumption

• 12.95 Watts

Operating Voltage

• 48VDC +/- 10% for PoE

Temperature

• Operating: -4 ºF to 140ºF (0ºC to 40ºC)
• Storing: -4ºF to 149ºF (-20ºC to 65ºC)

Humidity

• Operating: 10%~90% (non-condensing)
• Storing: 5%~95% (non-condensing)

Certifications

• FCC Class B
• IC
• UL60950

Ingress Protection Rating

• IP65

Weight

• 1.58 lbs (717g)

Dimensions (WxHxD)

• 7.8” x 6.4” x 2.3” (198mm x 163mm x 58mm)

Service

• 1 Year of CloudCommand™ Service³ (Included)

Warranty

• 1 Year Limited⁴

^{1 Please note that operating frequency ranges vary depending on the regulations of individual countries or juristictions. The DAP-3525 may not be supported in the 5.25-5.35 GHz and 5.47-5.725GHz frequency ranges in certain regions.
2 The maximum transmit power is available with 2 antennas. The value of 1 antenna is 18dBm @ 2.4Ghz and 17dBm @ 5Ghz.
3 Additional yearly renewal is required after first year.
4 1-Year limited warranty available only in the USA and Canada.}