How do I upgrade the PROM code on an xStack series (DGS-3324SR DGS-3324SRi DXS-3326GSR DXS-3350SR) switches?
Step 1. Run HyperTerminal from Start >Programs > Accessories > Communications >HyperTerminal.
Step 2. On the Connection Description window,enter a name for this connection. Click OK.
Step 3. On the Connect To window, select the COMport that the serial cable is connected to using the drop-down boxnext to Connect Using. Click OK.
Step 4. On the COMX Properties (X represents theCOM port number) window, select the following settings using thedrop-down boxes:
- Bits per second - 115200
- Data bits - 8
- Parity - None
- Stop bits - 1
- Flow control - Hardware
Click OK
You will now see a blank screen which shows Connected at the bottomleft hand corner of the screen.
Step 5. Log into the switch and then reboot theswitch.
Step 6. Press "#" (Shift 3) before the POST runsto 100%.
Step 7. After a short delay, the switch willattempt to establish a connection to the Z-Modem, as shownbelow.
Step 8. Click Transfer -> SendFile, which will open the "Send File" window:
Step 9. Choose the PROM file to be upgraded byutilizing the Browse button and pressing "Send."After the file transfer has completed, the device will rebootautomatically.
IMPORTANT: During the reboot process, DO NOT power off theswitch. Doing so will cause a boot failure and the device cannot berebooted. The RMA (Return Material Authorization) process will beneeded for recovery.
Step 10. After rebooting, the PROM version will bechanged.
3 Други потребители намират това за полезно.
Беше ли това полезно за Вас?3 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.