How do I enable a new camera in D-ViewCam?
D-ViewCam is software that may be purchased separately. It is useful for monitoring multiple Cloud Cameras simultaneously.
Step 1: Launch the D-ViewCam console. Once the console loads, click on the General Settings icon, then Setting, and then click System Setting.
Step 2: Click on the Camera tab.
Step 3: Click Search to automatically find the IP camera(s) that are on your local area network (LAN).
Step 4: Select one of the IP cameras that are available. You may enter a new name for this camera and then enter the administrator username and password assigned to this camera. Click OK to add the camera.
Step 5: The pop-up window will close and the new camera should appear on the list.
If a camera does not support UPnP, you can manually add a camera as below.
Step 1: Click Insert to manually add a network camera that is on your local area network (LAN).
Step 2: Enter the following network information for your camera:
• Name - Enter a name for your camera.
• IP Address - Enter the IP address of this camera. If you want to use a domain name, then select DNS and enter the domain name.
• HTTP Port - 80 is the default port.
• User Name - Enter the administrator user name for this camera.
• Password - Enter the administrator password for this camera.
• Protocol - Select TCP, UDP, HTTP, or HTTPS.
Enter the following device information for your camera:
• Auto Detect - Click to detect the vender and model information.
• Vendor - Select the brand name from the dropdown menu.
• Camera Model - Select the camera model from the drop-down menu.
• Video Channel - Select the video channel you want to assign the camera
Step 3: Click OK to add your camera.
0 Други потребители намират това за полезно.
Беше ли това полезно за Вас?0 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.