How do I access the DMC-1002 to monitor and maintain it?
To monitor and maintain your media converter modules, using theDMC-1002, there are two ways of connecting: ethernet(RJ-45) or serial connection (RS-232)
Connect by ethernet
Power off the chassis. Use cross-over CAT5/6cable, connect up to your computer. Power onthe chassis and verify that you see power lightlink light on the DMC-1002.
Set a static IP address on your PC, in the same range as yourDMC-1002, which is by default 192.168.1.1 (eg.192.168.1.5/24)
Then open Internet Explorer, and access the address
login using username: root password: root
Connect by serial connection
Power off the chassis. Use a female to femaleRS-232 cable, then connect your computer to the DMC-1002.
Run hyperterminal from a windows based machine (or any SSHclient for other OS). When creating a connection, choose Data Rate9600, 8bit, 1 etc.
Transfer files
To transfer files (eg. new firmware )between computer andDMC-1002, you will need to run a TFTP software on yourcomputer.
You may download the software from D-Link, compatible withWindows.
1 Други потребители намират това за полезно.
Беше ли това полезно за Вас?1 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.