How do I set up encryption on the DWL-810 wireless bridge?
It is recommended to enable encryption on your wireless router oraccess point before your wireless bridge. Please establish wirelessconnectivity before enabling encryption.
Note: Your network will slow down and wirelesssignal may degrade when enabling encryption due to the addedoverhead.
Step 1 Open your web browser and enter the IPaddress of the DWL-810 (192.168.0.30). Make sure your computer hasan IP address within the same subnet (192.168.0.x) as theDWL-810.
Step 2 Enter your username (admin) and password(blank). Click OK to continue.
Step 3 Click on Wireless. Makesure you have set encryption on your wireless access point orrouter first.
Step 4 Check the box next to WEPEnabled. Choose the WEP Key Length,either 64 or 128-bit. Enter the Hex WEP key that you entered onyour wireless access point or router. If you are in an Ad-Hocnetwork, make up a Hex key and enter the same key on your otherwireless nodes. Check the boxes next to Deny UnencryptedData and Shared Key Authentication.
Step 5 Click Apply to savesettings. Click Reboot when prompted.
1 Други потребители намират това за полезно.
Беше ли това полезно за Вас?1 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.