How do I configure my DWL-810 in ad-hoc mode?
Step 1 From a computer that is hard-wired tothe DWL-810 , open your internet browser and enter the IP addressof the DWL-810 (http://192.168.0.30).
Step 2 The DWL-810 logon screen should come up.Type the username (admin) and the password will remain blank.
Step 3 Once you are logged in click on theWireless tab. From the Wireless settings page selectAd-hoc as the operation mode and enter an SSID forthe Ad-hoc network.
Step 4 Click Apply to save thesettings and Continue to return to the DWL-810 configuration.
Note: Be sure that any device that will beassociating with this Ad-hoc network is configured with the samechannel and have the exact same SSID as the DWL-810 .
3 Други потребители намират това за полезно.
Беше ли това полезно за Вас?3 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.